✦ LIBER ✦

Corrosion Books: Composite Solutions: Thermosets and thermoplastics.

Book ID: 102480453
Publisher: John Wiley and Sons
Year: 2006
Tongue: German
Weight: 75 KB
Volume: 57
Category: Article
ISSN: 0947-5117
DOI: 10.1002/maco.200690082

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Interfacial micromechanics in thermoplas

Interfacial micromechanics in thermoplastic and thermosetting matrix carbon fibre composites

✍ Yanling Huang; Robert J. Young 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 876 KB

Shear strength of polymers and fibre com

Shear strength of polymers and fibre composites: 1. thermoplastic and thermoset polymers

✍ K. Liu; M.R. Piggott 📂 Article 📅 1995 🏛 Elsevier Science ⚖ 700 KB

Temperature-time analogy applied to ther

Temperature-time analogy applied to thermorheologically complex polymer materials. 2. Mixtures of thermoplastic and thermosetting polymers (polymer-oligomer composites)

✍ A. Ya. Gol'dman; G. Kh. Murzakhanov; O. A. Soshina 📂 Article 📅 1978 🏛 Springer US 🌐 English ⚖ 548 KB

Corrosion and corrosion inhibition of al

Corrosion and corrosion inhibition of alumina particulate/aluminium alloys metal matrix composites in neutral chloride solutions

✍ C. MONTICELLI; F. ZUCCHI; G. BRUNORO; G. TRABANELLI 📂 Article 📅 1997 🏛 Springer 🌐 English ⚖ 658 KB

Corrosion Books: Composite materials: Sc

Corrosion Books: Composite materials: Science and applications - Functional materials for modern technologies. By: Deborah D. L. Chung - Materials and Corrosion 10/2003

✍ H. Klingelhöffer 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 German ⚖ 47 KB

Pore solution composition and reinforcem

Pore solution composition and reinforcement corrosion characteristics of microsilica blended cement concrete

✍ Rasheeduzzafar; S. Ehtesham Hussain; A.S. Al-Gahtani 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 848 KB

Plain and microsilica blended cement pastes with water-cement ratio of 0.6 were prepared using a 14% C aA cement. Two levels of chloride from NaC1 corresponding to 0.6% and 1.2% by weight of cement were added through mix water. The pastes were allowed to hydrate in sealed containers for 180 days and