✦ LIBER ✦

Corrosion behaviour of high-Cr ferritic steels in MCFCs

Publisher: Elsevier Science
Year: 2001
Tongue: English
Weight: 218 KB
Volume: 4
Category: Article
ISSN: 1464-2859
DOI: 10.1016/s1464-2859(01)80532-0

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of inclusions on very high cycle

Effect of inclusions on very high cycle behaviour in a ferritic corrosion resisting steel

✍ František Nový; Otakar Bokůvka; Peter Palček; Mária Chalupová 📂 Article 📅 2011 🏛 Elsevier 🌐 English ⚖ 394 KB

The number of structural components which must operate frequently at repeated loading higher as N ≈ 10 6 -10 7 cycles increases. This fact is serious problem in engineering practice. Fatigue lifetime in the ultra high cycle region (10 8 < N< 10 11 cycles) is therefore studied very intensively with t

High temperature corrosion of 12%Cr-Al c

High temperature corrosion of 12%Cr-Al cast steels

✍ B. Zaghloul; N. Nassif; A.A. Abdul Azim 📂 Article 📅 1984 🏛 Elsevier Science ⚖ 768 KB

High temperature scaling behaviour of fe

High temperature scaling behaviour of ferritic stainless steels alloyed with yttrium

✍ U. Bernabai; M. Cavallini 📂 Article 📅 1978 🏛 Elsevier Science ⚖ 631 KB

Effect of temperature on high cycle fati

Effect of temperature on high cycle fatigue behaviour in 18Cr–2Mo ferritic stainless steel

✍ Y. Uematsu; M. Akita; M. Nakajima; K. Tokaji 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 937 KB

Fully reversed axial fatigue tests have been performed using smooth specimens of 18Cr-2Mo ferritic stainless steel (type 444) at ambient temperature, 673 K and 773 K in laboratory air, in order to understand the effect of temperature on high cycle fatigue behaviour. Fatigue strength significantly de

Formation of residual ferrite in 9Cr-ODS

Formation of residual ferrite in 9Cr-ODS ferritic steels

✍ M. Yamamoto; S. Ukai; S. Hayashi; T. Kaito; S. Ohtsuka 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 1012 KB

The influence of alloying elements on th

The influence of alloying elements on the corrosion behaviour of ferritic steels in simulated combustion atmospheres

✍ S. Sroda; D. Baxter; M. Arponen 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 German ⚖ 392 KB 👁 1 views

## Abstract The low‐chromium steels (Cr content 0.7–1.4 wt.%) are usually being used in low temperature boiler applications where the environments are not so aggressive as in waste‐fire boilers. To improve their mechanical properties and corrosion resistance several alloying elements have been used