๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Corrosion behaviour of blended cements in low and medium strength concretes

โœ Scribed by P. Dinakar; K.G. Babu; Manu Santhanam

Book ID
108084791
Publisher
Elsevier Science
Year
2007
Tongue
English
Weight
505 KB
Volume
29
Category
Article
ISSN
0958-9465

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Accelerated strength and testing of conc
Accelerated strength and testing of concrete using blended cement
โœ Musa R. Resheidat; Mwafag S. Ghanma ๐Ÿ“‚ Article ๐Ÿ“… 1997 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 593 KB

Accelerated strength testing using the boiling water procedure of ASTM C 684 was performed to evaluate this test method for use in the routine quality control of concrete made of local materials with particular emphasis on the use of blended cements, and in the prediction of potential quality and st

Temperature effect on strength of mortar
Temperature effect on strength of mortars and concrete containing blended cements
โœ Wajahat H. Mirza; Soliman I. Al-Noury; Waleed H. Al-Bedawi ๐Ÿ“‚ Article ๐Ÿ“… 1991 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 531 KB

The results of a study on the influence of temperature on the compressive strength of mortars and concrete are described. Identical specimens were exposed to temperatures of 25ยฐC, 35ยฐC or 50ยฐC for sustained periods of up to 300 days. Besides ordinary Portland cement (OPC), blends of OPC with powdere

Pore solution composition and reinforcem
Pore solution composition and reinforcement corrosion characteristics of microsilica blended cement concrete
โœ Rasheeduzzafar; S. Ehtesham Hussain; A.S. Al-Gahtani ๐Ÿ“‚ Article ๐Ÿ“… 1991 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 848 KB

Plain and microsilica blended cement pastes with water-cement ratio of 0.6 were prepared using a 14% C aA cement. Two levels of chloride from NaC1 corresponding to 0.6% and 1.2% by weight of cement were added through mix water. The pastes were allowed to hydrate in sealed containers for 180 days and