✦ LIBER ✦

Corrosion and abrasion resistivities to sea water and whirled sea sand of TiN-coated stainless steel

✍ Scribed by Seiji Motojima; Masanori Kohno

Publisher: Elsevier Science
Year: 1986
Tongue: English
Weight: 291 KB
Volume: 137
Category: Article
ISSN: 0040-6090
DOI: 10.1016/0040-6090(86)90194-x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Erosion and corrosion properties of WC c

Erosion and corrosion properties of WC coatings and duplex stainless steel in sand-containing synthetic sea water

✍ M. Bjordal; E. Bardal; T. Rogne; T.G. Eggen 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 675 KB

Corrosion resistance of stainless steels

Corrosion resistance of stainless steels and nickel alloys in artificial sea water

✍ M. Pötzschke; M.B. Rockel 📂 Article 📅 1983 🏛 Elsevier Science 🌐 English ⚖ 485 KB

Stainless steels are increasingly used for sea water applications. Since stainless steels on the basis of AISI 316 are not sufficient in respect to their resistance against pitting, crevice and stress cracking corrosion higher in Cr and MO containing stainless steels as well as improved NiCrFeMo all

Contribution to the discussion on Locali

Contribution to the discussion on Localized Corrosion of Stainless Steels in natural sea water

✍ E. D. Mor; V. Scotto; A. Mollica 📂 Article 📅 1980 🏛 John Wiley and Sons 🌐 German ⚖ 552 KB

## Abstract Electrochemical hysteresis methods are employed to develop experimental potential‐pH diagrams for some commercial austenitic and ferritic stainless steels in 3% sodium chloride solutions at room temperature. The results were compared with the electrochemical and the gravimetric behaviou

Study on welding such dissimilar materia

Study on welding such dissimilar materials as AISI 304 stainless steel and DHP copper in a sea-water environment. Influence of weld metals on corrosion

✍ E. Zumelzu; C. Cabezas 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 270 KB

Improvement of pitting corrosion resista

Improvement of pitting corrosion resistance of AISI 444 stainless steel to make it a possible substitute for AISI 304L and 316L in hot natural waters

✍ T. Bellezze; G. Roventi; A. Quaranta; R. Fratesi 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 German ⚖ 451 KB 👁 1 views

## Abstract The pitting corrosion resistance of AISI 444, 304L and 316L stainless steels in two tap waters with different chloride concentrations at 80 °C was studied. Cyclic potentiodynamic polarization (CPP) tests were carried out starting from __E__~corr~ − 30 mV until the current density reache