𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Correlations of flow maldistribution parameters in an air cooled heat exchanger

✍ Scribed by M. A. Habib; R. Ben-Mansour; S. A. M. Said; J. J. Al-Bagawi; K. M. Al-Mansour

Publisher
John Wiley and Sons
Year
2007
Tongue
English
Weight
486 KB
Volume
56
Category
Article
ISSN
0271-2091

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

An analysis of heat transfer for turbule
An analysis of heat transfer for turbulent axial flow in close clearance exchangers
✍ Lindon Thomas πŸ“‚ Article πŸ“… 1972 πŸ› Elsevier Science 🌐 English βš– 376 KB

The heat transfer for turbulent axial flow in close clearance exchangers is analyzed with the aid of the basic surface renewal and penetration principle. This analysis essentially involves two mechanisms of renewal; that is, renewal associated with the periodic scraping action of the blades, and ren

Predicting flow induced vibration in u-b
Predicting flow induced vibration in u-bend regions of heat exchangers: an engineering solution
✍ Krishna P. Singh πŸ“‚ Article πŸ“… 1976 πŸ› Elsevier Science 🌐 English βš– 623 KB

## From the standpoint of flow induced vibrations, U-bends of tubular heat exchangers constitute structurally one of the most vulnerable regions. The U-bends possess relatively low our-of-plane frequency enabling them to extract energy from the shell stream at low flow velocities. All published corr

Prediction of heat exchanger performance
Prediction of heat exchanger performance by the thermal network method (Improvement of an evaporator's performance and restraining air flow bypass by adjusting the refrigerant-flow path pattern)
✍ Kunihiko Kaga; Satoru Kotoh; Teturo Ogushi; Hideo Yoshida πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 715 KB

## Abstract This paper presents the influence of latent heat load by changing the relative humidity of air flow distribution in the super‐heated gas region in an evaporator and the effect of the refrigerant flow path pattern. To estimate the influence, we applied the thermal network method that can