𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Correction of spatial distortion in EPI due to inhomogeneous static magnetic fields using the reversed gradient method

✍ Scribed by Paul S. Morgan; Richard W. Bowtell; Dominick J.O. McIntyre; Brian S. Worthington


Publisher
John Wiley and Sons
Year
2004
Tongue
English
Weight
534 KB
Volume
19
Category
Article
ISSN
1053-1807

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

Purpose

To derive and implement a method for correcting spatial distortion caused by in vivo inhomogeneous static magnetic fields in echo‐planar imaging (EPI).

Materials and Methods

The reversed gradient method, which was initially devised to correct distortion in images generated by spin‐warp MRI, was adapted to correct distortion in EP images. This method provides point‐by‐point correction of distortion throughout the image. EP images, acquired with a 3 T MRI system, of a phantom and a volunteer's head were used to test the correction method.

Results

Good correction was observed in all cases. Spatial distortion in the uncorrected images ranged up to 4 pixels (12 mm) and was corrected successfully.

Conclusion

The correction was improved by the application of a nonlinear interpolation scheme. The correction requires that two EP images be acquired at each slice position. This increases the acquisition time, but an improved signal‐to‐noise ratio (SNR) is seen in the corrected image. The local SNR gain decreases with increasing distortion. In many EPI acquisition schemes, multiple images are averaged at each slice position to increase the SNR; in such cases the reversed gradient correction method can be applied with no increase in acquisition duration. J. Magn. Reson. Imaging 2004;19:499–507. © 2004 Wiley‐Liss, Inc.


📜 SIMILAR VOLUMES


Correction of distortions due to the pul
✍ P. Jehenson; A. Syrota 📂 Article 📅 1989 🏛 John Wiley and Sons 🌐 English ⚖ 186 KB

Gradient pulses used in most localization techniques induce time-dependent shifts in Bo that strongly distort NMR signals. A postprocessing correction method requiring no additional hardware is proposed. The phase shift produced by the Bo shift is calculated from a reference free induction decay (FI