𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Copolymerization of 1-butene and 1-hexene with supported titanium catalyst

✍ Scribed by Zhao, Yongxian ;Shao, Huafeng ;Wang, Bo ;Yao, Wei ;Huang, Baochen


Book ID
107475807
Publisher
Higher Education Press and Springer
Year
2007
Tongue
English
Weight
369 KB
Volume
1
Category
Article
ISSN
1673-7369

No coin nor oath required. For personal study only.


📜 SIMILAR VOLUMES


Copolymerization of styrene and 1-butene
✍ Feng Gao; Shangan Lin 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 511 KB

## Abstract Copolymerization of styrene and 1‐butene was first conducted at 50°C with a novel Ti catalyst by using Al(iBu)~3~ (iBu = isobutyl) as cocatalyst. The Ti catalyst is composed of MgCl~2~/TiCl~4~/PhCOOEt/Ph~2~SiCl~2~/SiCl~4~/NdCl~__x__~(OR)~__y__~/Al(iBu)~3~ (assigned as SN‐1 catalyst), wh

Copolymerization of ethylene and 1-hexen
✍ Jung Dae Kim; João B. P. Soares 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 53 KB 👁 2 views

The effect of different catalyst support treatments in the 1-hexene/ethylene copolymerization with supported metallocene catalysts was investigated through the analysis of molecular weight and chemical composition distributions by means of high temperature gel permeation chromatography (GPC) and cry

Terpolymerization of ethylene, propylene
✍ Lixin Sun; Shangan Lin 📂 Article 📅 1990 🏛 John Wiley and Sons 🌐 English ⚖ 645 KB

## Abstract An investigation of ethylene‐propylene‐butene‐1 terpolymerization in the presence of TiCl~4~, Ti(OBu)~4~/MgCl~2~/ethylbenzoate (EB)/π~2~SiCl~2~/AlEt~3~ catalyst is described. The catalytic efficiency is very high, i.e., 86000g/g Ti under ambient conditions. The decay rate of terpolymeri

Liquid Pool Copolymerization of Propylen
✍ Fabricio M. Silva; Príamo A. Melo; Márcio Nele; Enrique L. Lima; José Carlos Pin 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 318 KB

## Abstract **Summary:** Liquid pool propylene/1‐butene copolymerizations were carried out in a batch reactor with a high activity Ziegler‐Natta catalyst system. Experimental runs were performed to evaluate the effect of the 1‐butene content on the crystallinity and melt temperature of the polymer