Abstract
In this work, the effect of the introduction of modified solid surfaces into polymer blends on the phase‐separation process was investigated. Glass fibers with surfaces having different chemistries were introduced into polystyrene–poly(methyl methacrylate) blends. The glass fibers used either had fully hydrated surfaces or had surfaces covered with a random copolymer, poly(styrene‐co‐methyl methacrylate). The copolymer was synthesized by free‐radical polymerization of styrene and methyl methacrylate in the presence of previously vinyl silane‐treated glass fibers. The copolymerization and grafting procedures were investigated by FTIR and thermal analysis. Blends containing the fibers were studied using FTIR microscopy and optical microscopy. FTIR microscopy results showed that the composition of the phases in the blends was shifted by using fibers with different surface chemistries. Fibers with grafted copolymers were capable of narrowing the immiscibility region in the phase diagram, while fully hydrated fibers were able to expand the gap. It was proposed that interfacial interactions regulated by a hydrophilic–hydrophobic type of forces were responsible for guiding the described phase‐separation process. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1619–1627, 2003