✦ LIBER ✦

Control valve with ‘C’ seal

Publisher: Elsevier Science
Year: 2006
Tongue: English
Weight: 216 KB
Volume: 2006
Category: Article
ISSN: 1350-4789
DOI: 10.1016/s1350-4789(06)71265-x

No coin nor oath required. For personal study only.

✦ Synopsis

This patent describes a seal arrangement for the pin of the pivot joints of the beams for a bucket loader or other hydraulic earthmoving equipment. The seal for the end of the pin has a pair of

📜 SIMILAR VOLUMES

Seal for control valve

📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 122 KB

In a photocopying machine, electrostatic charges are applied, to create an electrostatic image and

Electropneumatic control valve seal

📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 156 KB

percent per year. To meet such demand, the company intends to create a grade slate of high molecular weight polymers that will cover most customer needs, such as high green strength or extremely low temperature applications. ## Gas-phase metallocene production Rhenman explains that such grades can

Seal and control valve

📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 104 KB

A porous ceramic that can be used for mechanical seal faces is described. The pores are not less than 5 µm, and are compressed into an elliptical shape with the minor diameter parallel to the direction of sliding. The value of the cross-sectional area of the pores relative to a circular pore is defi

Seal cartridge control valve

📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 323 KB

## High-pressure fuel pump and seal system Applicants: NOK Corp and Denso

Fluid flow control valve with compositio

Fluid flow control valve with composition seal

📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 310 KB

A rotary joint for a tyre inflation unit is disclosed. This design uses brush seals and has the advantage over conventional solutions that no separate pressure control channel for the pressurization of the seal is required.

Control valve trim and seal

📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 235 KB

A seal that is used for creating a seal between the plug and cage of a control valve is described. The valve cage is located in the valve body and includes an internal surface, sized to receive the valve plug such that a gap between the valve cage and the valve plug defines a leak path. A sealing ri