✦ LIBER ✦

Control of wetting on Ti-based bulk metallic glass surfaces by a hydrothermal method

✍ Scribed by Ken-ichi Katsumata; Takeshi Wada; Akihisa Inoue; Munetoshi Sakai; Akira Nakajima; Akira Fujishima; Nobuhiro Matsushita; Kiyoshi Okada

Publisher: Springer
Year: 2011
Tongue: English
Weight: 453 KB
Volume: 46
Category: Article
ISSN: 0022-2461
DOI: 10.1007/s10853-010-5245-2

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Bioactive titanate nanomesh layer on the

Bioactive titanate nanomesh layer on the Ti-based bulk metallic glass by hydrothermal–electrochemical technique

✍ Naota Sugiyama; HaiYan Xu; Takamasa Onoki; Yasuto Hoshikawa; Tomoaki Watanabe; N 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 730 KB

Titanate nanomesh layers were fabricated on Ti-based bulk metallic glass (BMG) to induce bioactivity in the form of apatite-forming ability. Titanate nanomesh layers were prepared by hydrothermal-electrochemical treatment at 90 °C for 2 h, with an aqueous solution of NaOH as an electrolyte. A consta

Development of plastic Ti-based bulk-met

Development of plastic Ti-based bulk-metallic-glass-matrix composites by controlling the microstructures

✍ J.W. Qiao; J.T. Zhang; F. Jiang; Y. Zhang; P.K. Liaw; Y. Ren; G.L. Chen 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 967 KB

Lightweight and plastic Ti-based bulk-metallic-glass-matrix composites (BMGMCs) were fabricated by the Bridgman solidification. The ␤-Ti dendrites were uniformly distributed within the glass matrix. By tailoring the withdrawal velocity, v, the linear dependences of the spanning length, s, and the vo

Effects of growing integrated layer [GIL

Effects of growing integrated layer [GIL] formation on bonding behavior between hydroxyapatite ceramics and Ti-based bulk metallic glasses via hydrothermal hot-pressing

✍ Takamasa Onoki; Xinmin Wang; Shengli Zhu; Naota Sugiyama; Yasuto Hoshikawa; Masa 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 610 KB

A Crystalline Catalyst Based on a Porous

A Crystalline Catalyst Based on a Porous Metal-Organic Framework and 12-Tungstosilicic Acid: Particle Size Control by Hydrothermal Synthesis for the Formation of Dimethyl Ether

✍ Da-Dong Liang; Shu-Xia Liu; Feng-Ji Ma; Feng Wei; Ya-Guang Chen 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 413 KB 👁 2 views

Oxygen interaction of CdS-based gas sens

Oxygen interaction of CdS-based gas sensors with different stoichiometric compositions was studied by X-ray photoelectron spectroscopy (XPS) and thermal-desorption mass spectroscopy observations combined with conductivity measurements. Three different types of film with different atomic ratios of Cd/S were used in the study of oxygen chemisorption in a low-temperature range between 300 and 570 K. Spray pyrolysis was used for the deposition of the films on glass substrates; XPS and energy dispersive spectroscopy of X-ray together with atomic force microscopy and scanning electron microscopy were used for the characterization of the composition and structure of the films. It was possible to distinguish different temperature ranges for the thermal desorption of the different adsorbed oxygen species. A comparison of the data from XPS and mass-spectroscopy observations with conductance measurements allows to conclude that metallic surface atoms are responsible for different interactions of oxygen species with CdS surfaces.

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 379 KB