✦ LIBER ✦

Contribution of early works by Terence G. Langdon to modern materials science

✍ Scribed by Ruslan Z. Valiev; Yuntian T. Zhu

Book ID: 103840798
Publisher: Elsevier Science
Year: 2005
Tongue: English
Weight: 58 KB
Volume: 410-411
Category: Article
ISSN: 0921-5093
DOI: 10.1016/j.msea.2005.08.105

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Influence of grain size on deformation m

Influence of grain size on deformation mechanisms: An extension to nanocrystalline materials

✍ Yuntian T. Zhu; Terence G. Langdon 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 357 KB

Mechanical characteristics of a Zn–22% A

Mechanical characteristics of a Zn–22% Al alloy processed to very high strains by ECAP

✍ Praveen Kumar; Cheng Xu; Terence G. Langdon 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 322 KB

The contributions of grain size, disloca

The contributions of grain size, dislocation density and twinning to the strength of a magnesium alloy processed by ECAP

✍ Levente Balogh; Roberto B. Figueiredo; Tamás Ungár; Terence G. Langdon 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 434 KB

A ZK60 magnesium alloy was processed by equal-channel angular pressing (ECAP) for up to 8 passes at 473 K and the evolution of strength and microstructural parameters were determined using hardness testing and X-ray line profile analysis. The results show the subgrain size and twin boundary density

Encounters with a Radical Erasmus: Erasm

Encounters with a Radical Erasmus: Erasmus' Work as a Source of Radical Thought in Early Modern Europe. By Peter G. Bietenholz, Exploiting Erasmus: The Erasmian Legacy and Religious Change in Early Modern England. By Gregory D. Dodds and Paraphrases on the Epistles to the Cortinthians, Ephesians, Philippians, Colossians, and Thessalonians. By Desiderius Erasmus [Collected Works of Erasmus, vol. 43]. Edited by Robert D. Sider. Translated and annotated by Mechtilde O'Mara and Edward A. Phillips Jr.

✍ Alastair Hamilton 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 57 KB

Using ball-indentation to evaluate the p

Using ball-indentation to evaluate the properties of an ultrafine-grained Al–2% Si alloy processed by ECAP

✍ K. Venkateswarlu; Gautam Das; A.K. Pramanik; Cheng Xu; Terence G. Langdon 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 406 KB

As-cast Al-Si alloys exhibit excellent mechanical properties but these properties may be further improved through processing by equal-channel angular pressing (ECAP). In this investigation, specimens of a hypo-eutectic Al-2% Si alloy were successfully pressed up to a maximum of four passes at room t