✦ LIBER ✦

Consolidation and properties of ball-milled Ti50Cu18Ni22Al4Sn6 glassy alloy by equal channel angular extrusion

✍ Scribed by L.C. Zhang; J. Xu; E. Ma

Publisher: Elsevier Science
Year: 2006
Tongue: English
Weight: 716 KB
Volume: 434
Category: Article
ISSN: 0921-5093
DOI: 10.1016/j.msea.2006.06.085

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Compaction of amorphous aluminum alloy p

Compaction of amorphous aluminum alloy powder by direct extrusion and equal channel angular extrusion

✍ O.N. Senkov; S.V. Senkova; J.M. Scott; D.B. Miracle 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 910 KB

Structure and mechanical properties of c

Structure and mechanical properties of commercial Al–Mg 1560 alloy after equal-channel angular extrusion and annealing

✍ M.V. Markushev; M.Yu. Murashkin 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 582 KB

Structure-property relationships in commercial 1560 (Al-6.0 wt.% Mg-0.6 wt.% Mn) aluminium alloy subjected to equal-channel angular extrusion (ECAE) and subsequent annealing have been analyzed. The features of the submicrocrystalline (SMC) deformation structure obtained by ECAE and its transformatio

Mechanical properties and microstructure

Mechanical properties and microstructure of a Mg alloy AZ31 prepared by equal-channel angular pressing

✍ M. Janeček; M. Popov; M.G. Krieger; R.J. Hellmig; Y. Estrin 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 808 KB

Microstructure and dry sliding wear beha

Microstructure and dry sliding wear behavior of Cu–10%Al–4%Fe alloy produced by equal channel angular extrusion

✍ L.L. Gao; X.H. Cheng 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 964 KB

Microstructure and mechanical properties

Microstructure and mechanical properties of SPD-processed an as-cast AZ91D+Y magnesium alloy by equal channel angular extrusion and multi-axial forging

✍ Zude Zhao; Qiang Chen; Chuankai Hu; Dayu Shu 📂 Article 📅 2009 🏛 Elsevier Science ⚖ 755 KB

Microstructure and properties of ultra-f

Microstructure and properties of ultra-fine grain Cu–Cr alloy prepared by equal-channel angular pressing

✍ C.Z. Xu; Q.J. Wang; M.S. Zheng; J.W. Zhu; J.D. Li; M.Q. Huang; Q.M. Jia; Z.Z. Du 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 750 KB

Ultra-fine grain (UFG) Cu-Cr alloy is prepared by equal-channel angular pressing (ECAP). The microstructure, tensile and fatigue properties of the UFG Cu-Cr alloy were investigated. The bulk materials with average grain size of ∼230 nm were obtained through ECAP for 12 times. The cellular subgrains