๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Conductivity of aromatic-based proton exchange membranes at subzero temperatures

โœ Scribed by Junbo Hou; Hongmei Yu; Liang Wang; Danmin Xing; Zhongjun Hou; Pingwen Ming; Zhigang Shao; Baolian Yi


Book ID
104025048
Publisher
Elsevier Science
Year
2008
Tongue
English
Weight
387 KB
Volume
180
Category
Article
ISSN
0378-7753

No coin nor oath required. For personal study only.


๐Ÿ“œ SIMILAR VOLUMES


Proton conducting membranes based on ble
โœ M.K. Daletou; N. Gourdoupi; J.K. Kallitsis ๐Ÿ“‚ Article ๐Ÿ“… 2005 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 429 KB

New aromatic copolymers bearing polar pyridine units in the main chain have been synthesized. Depending on the content of the pyridine monomer, soluble, high molecular weight polymers were obtained. The studied copolymers showed high thermal and oxidative stability and high T g values but moderate a

Towards high water retention of proton e
โœ Hongting Pu; Dan Wang; Zhenglong Yang ๐Ÿ“‚ Article ๐Ÿ“… 2010 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 1004 KB

The proton conductivity of perfluorosulfonic polymers, such as Nafion ยฎ , increases with increasing relative humidity and decreases enormously after 80 โ€ข C at the standard atmosphere due to the dehydration of the membranes. In present study, a new strategy to prepare the proton conducting membrane w

Effects of Humidification on the Membran
โœ K.-M. Yin; C.-P. Chang ๐Ÿ“‚ Article ๐Ÿ“… 2011 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 760 KB

## Abstract This study focuses on the performances of proton exchange membrane fuel cells (PEMFCs) at 80 and 90โ€‰ยฐC with feeds of varying degrees of humidification. The results show that ohmic resistance of the solid electrolyte decreases as the current density is raised because of the back diffusio

Development and Characterisation of Elec
โœ S. Bouatia; F. Mighri; M. Bousmina ๐Ÿ“‚ Article ๐Ÿ“… 2008 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 715 KB

## Abstract The main objective of this work was to develop films with controlled dimensions for proton exchange membrane fuel cell (PEMFC) bipolar plates (BPPs) using the twinโ€screw extrusion process. These films consisted of a lowโ€viscosity polyethylene terephthalate (PET) in which a mixture of hi