Computerized capillary gas chromatographic analysis of hydrocarbon mixtures in workplace air
✍ Scribed by Östen Einarsson; Jadwiga Gorczak; Nengt-Ove Lundmark; Ulf Palmqvist
- Publisher
- Elsevier Science
- Year
- 1990
- Tongue
- English
- Weight
- 996 KB
- Volume
- 498
- Category
- Article
- ISSN
- 1873-3778
No coin nor oath required. For personal study only.
✦ Synopsis
The quantitative composition of white spirit vapours in workplace air may differ considerably from the solvent being used, although all components are the same. By calculating the hygienic effect from the threshold limit value (NGV) of each component, a more reliable estimate is obtained of the occupational hazard than by using the NGV for white spirit. In this method the analyses were performed by on-column injection onto a temperature-programmed capillary column. Retention indices based on n-paraffins and isooctane were calculated using spline functions. Index tables were established for different hydrocarbon mixtures. The validity of the retention indices was found to be satisfactory, depending on the stability of the column and the possibility of optimizing the indices when replacing one column by another of the same type and dimensions.
Comparisons were made with alternative methods for determining the concentration of white spirit vapours in air samples. A polar column was used to check the total content of aromatics.
📜 SIMILAR VOLUMES
The PCI mass spectrum obtained with methane as reagent gas yielded a molecular ion peak at m/z 217 (M + 1) as the base peak. Other characteristic peaks were also discernible at m/z 245 (M + 29) and 257 (M + 41) (Figure 3B). Selective ion monitoring (SIM) could be used to quantify 1.0 ng of the deriv
## Abstract A slightly modified, commercially available high resolution capillary gas chromatograph and a PC‐based data processing system running proprietary software (“PONA”) have been employed in the development of a system for petroleum type analysis which would be equivalent or superior to the