✦ LIBER ✦

Computer simulation of transformation induced plasticity using finite element method

✍ Scribed by Ramakrishnan, R.; Okada, H.; Atluri, S.N.

Book ID: 122023689
Publisher: Elsevier Science
Year: 1991
Weight: 878 KB
Volume: 39
Category: Article
ISSN: 0956-7151
DOI: 10.1016/0956-7151(91)90218-P

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Crystal plasticity finite element simula

Crystal plasticity finite element simulations using a database of discrete Fourier transforms

✍ Alharbi, Hamad F.; Kalidindi, Surya R. 📂 Article 📅 2015 🏛 Elsevier Science 🌐 English ⚖ 870 KB

Computer simulation of U-channel for und

Computer simulation of U-channel for under-rail roll forming using rigid-plastic finite element methods

✍ S.H. Jeong; S.H. Lee; G.H. Kim; H.J. Seo; T.H. Kim 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 399 KB

Cold-roll forming (CRF) is a well-known process used to manufacture long sheet metal products with constant cross-section. This process makes it possible to manufacture intricate sheet metal products which cannot be made through the press process. It is a very important process in many industrial fi

Computer simulation of impression creep

Computer simulation of impression creep by the finite element method

✍ Hsiang-Yung Yu; J. C. M. Li 📂 Article 📅 1977 🏛 Springer 🌐 English ⚖ 538 KB

Simulation of polycrystalline aluminum t

Simulation of polycrystalline aluminum tensile test with crystal plasticity finite element method

✍ Liang-ying SI; LÜ Cheng; K. Tieu; Xiang-hua LIU 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 436 KB

SIMULATION OF THAWING OF FOODS USING FIN

SIMULATION OF THAWING OF FOODS USING FINITE ELEMENT METHOD

✍ H. ABDALLA; R. PAUL SINGH 📂 Article 📅 1985 🏛 John Wiley and Sons 🌐 English ⚖ 486 KB

Use of quasi-Newton methods for large st

Use of quasi-Newton methods for large strain elastic-plastic finite element computations

✍ Gelin, J. C. ;Picart, P. 📂 Article 📅 1988 🏛 Wiley (John Wiley & Sons) 🌐 English ⚖ 647 KB