This paper describes a computerized system for micropreparative enrichment of components from a mixture being separated on a capillary column. All electronic components are commercially available. Programming was performed in BASIC so that users can easily adapt the program to their own special need
Computer-controlled vacuum backflush for capillary GC
β Scribed by Rankin, Christine ;Sacks, Richard
- Publisher
- John Wiley and Sons
- Year
- 1990
- Tongue
- English
- Weight
- 466 KB
- Volume
- 13
- Category
- Article
- ISSN
- 0935-6304
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
A vacuumβpumpβoperated backflush system has been developed for applications involving highβspeed, repetitive GC analysis of gas streams containing ppm and ppb levels of organic vapor. The system uses an injector capable of cryofocusing and a relatively short length of 0.25βmm i.d. fused silica column for the separation of relatively simple mixtures of volatile compounds. Analysis times typically are in the 5β10 s range, and backflush times are in the 2β5 s range. Gases from the flame ionization detector are used as the backflush carrier gas, and no modification of the detector is necessary. A procedure is described which allows the average gas velocity to be measured during backflush operation. The minimum backflush time is directly proportional to the analysis time and to the square of the column length, making this system most useful with short columns and short analysis times.
π SIMILAR VOLUMES
## Abstract The selectivity of capillary columns coated with biscyanopropyl siloxane stationary phases for the separation of fatty acid methyl esters has been optimized by means of computerβassisted column temperature optimization software. Temperature programming rates yielding the highest resolut
The two main components of the electrophoretic equipment consisted of a flexible fused-silica capillary (50 pm
The Golay-Giddings and Poiseuille equations are used to derive equations for the calculation of the maximum plate number and minimum time conditions for given columns at fixed, but selectable, outlet pressures. In addition, expressions are presented for the determination of minimum analysis times fo