For a number of reasons, it is desirable to fabricate coils which, for a known current, shall produce predetermined values of the magnetic field intensity at a number of points within a nuclear magnetic resonance imager. The calculation of the magnetic field intensity at a set of points involves th
Computer-assisted design of surface coils used in magnetic resonance imaging. I. The calculation of the magnetic field
β Scribed by John H. Letcher
- Publisher
- Elsevier Science
- Year
- 1989
- Tongue
- English
- Weight
- 238 KB
- Volume
- 7
- Category
- Article
- ISSN
- 0730-725X
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
The purpose of this paper is to review the use of magMic reuomu~ imaging(MRI)oftbefetasaadto propose fatnre tedmiqws and applications. lnstitn~nal re!view board apprWed MB image8 of the fetns were acquiradia66patieatswithsoaog+hUy saspe&dfetalabnorn&tks.Axial,eoraacll,aad short TE images were obtaln
## Abstract Cylindrical receiver coils designed for intravaginal use were utilized to image the uterine cervix. Good quality images of the cervix, vaginal wall, and parametrium were obtained and patient tolerance of the procedure was good. Β© 1992 Academic Press, Inc.
## Abstract As the static magnetic field strength used in human magnetic resonance imaging increases, the wavelength of the corresponding radiofrequency field becomes comparable to the dimensions of the coil and volume of interest. The dielectric resonance effects that arise in this full wavelength
## Abstract We have designed a solid endorectal receiver coil for MRI of the prostate. The coil provided an improved signalβtoβnoise ratio up to 5 cm from its surface when compared with a standard pelvic phased array. This preliminary report describes 16 patients who were imaged using this coil, se