A micromechanics model was introduced to predict macroscopic deformation behavior of a material undergoing non-thermoelastic martensitic phase transformation. Considering the characteristics of ferrous alloys, the elliptic martensitic variants inclusion within a representative volume element of an a
Computational modelling of plasticity induced by martensitic phase transformations
β Scribed by Akke S. J. Suiker; Sergio Turteltaub
- Publisher
- John Wiley and Sons
- Year
- 2005
- Tongue
- English
- Weight
- 400 KB
- Volume
- 63
- Category
- Article
- ISSN
- 0029-5981
- DOI
- 10.1002/nme.1327
No coin nor oath required. For personal study only.
β¦ Synopsis
A time integration scheme is presented for the martensitic phase transformation model developed in recent theoretical work of Turteltaub and Suiker (A multi-scale thermomechanical model for cubic to tetragonal martensitic phase transformations 2005; Transformation-induced plasticity in ferrous alloys 2005). The phase transformation model can be used for analysing transformation-induced plasticity (TRIP) phenomena in ferrous alloys. The microstructural information for the phase transformation model is provided by the crystallographic theory of martensitic transformations. The transformation characteristics depend on the specific transformation systems activated during a loading process. The time integration scheme is formulated within a framework of finite deformations, where the stressupdate algorithm is based on a fully implicit Euler backward discretization. A robust search algorithm is used for detecting the transformation systems activated during loading. The completion of the transformation process is prescribed by a constraint on the total martensitic volume fraction, which is accurately satisfied in the converged state using a sub-stepping algorithm. The computation of the consistent tangent operator is performed through a numerical differentiation method, which avoids the determination of extensive analytical derivatives and allows the model to be easily adapted if necessary. The ability of the algorithm to solve complex transformation-induced plasticity problems is illustrated with the aid of three-dimensional analyses, in which an aggregate of single-crystal grains of retained austenite embedded in a ferrite-based matrix is subjected to uniaxial tension. The response characteristics are in agreement with experimental findings of Jacques et al.
π SIMILAR VOLUMES
## Abstract Evolution of fine structure in martensite undergoing an isothermal process is modelled on a microscopic level by using a positive homogeneous dissipation potential which can reflect a specific energy needed for a phase transformation between different variants of martensite. The model t
Using the in situ optical technique known as digital image correlation (DIC), full-field quantitative strain maps of localization have been experimentally obtained for the first time in thin sheets of Nitinol. The use of DIC provides new information connecting previous observations on the micro-and