The analysis of the surface electromyographic (sEMG) signal is particularly attractive because it provides relatively easy access to those physiological processes that allow the muscle to generate force and movement. In this paper, one of the possible applications of recurrence plot strategy to the
Compression of surface EMG signals with algebraic code excited linear prediction
โ Scribed by Elias Carotti; Juan Carlos De Martin; Roberto Merletti; Dario Farina
- Book ID
- 104048915
- Publisher
- Elsevier Science
- Year
- 2007
- Tongue
- English
- Weight
- 162 KB
- Volume
- 29
- Category
- Article
- ISSN
- 1350-4533
No coin nor oath required. For personal study only.
โฆ Synopsis
Despite the interest in long timescale recordings of surface electromyographic (EMG) signals, only a few studies have focused on EMG compression. In this paper we investigate a lossy coding technique for surface EMG signals that is based on the algebraic code excited linear prediction (ACELP) paradigm, widely used for speech signal coding. The algorithm was adapted to the EMG characteristics and tested on both simulated and experimental signals. The coding parameters selected led to a compression ratio of 87.3%. For simulated signals, the mean square error in signal reconstruction and the percentage error in average rectified value after compression were 11.2% and 4.90%, respectively. For experimental signals, they were 6.74% and 3.11%. The mean power spectral frequency and third-order power spectral moment were estimated with relative errors smaller than 1.23% and 8.50% for simulated signals, and 3.74% and 5.95% for experimental signals. It was concluded that the proposed coding scheme could be effectively used for high rate and low distortion compression of surface EMG signals. Moreover, the method is characterized by moderate complexity (approximately 20 million instructions/s) and an algorithmic delay smaller than 160 samples (approximately 160ms).
๐ SIMILAR VOLUMES
The paper reports on the prediction of the effects of blowing on the evolution of the thermal and velocity fields in a flat-plate turbulent boundary layer developing over a porous surface. Closure of the time-averaged equations governing the transport of momentum and thermal energy is achieved using