𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Composite joints subject to reversal of loading—Part 1: experimental study

✍ Scribed by J.Y.Richard Liew; T.H. Teo; N.E. Shanmugam


Publisher
Elsevier Science
Year
2004
Tongue
English
Weight
648 KB
Volume
60
Category
Article
ISSN
0143-974X

No coin nor oath required. For personal study only.

✦ Synopsis


This paper is concerned with the tests on composite beam-to-column joints subject to reversal of loads. The first phase of the tests consisting of six beam-to-column joint specimens subject to negative moment was reported earlier [J. Construct. Steel Res. 2000; 56: 117-50]. In the current phase, eight cruciform composite joint specimens were tested under reversal of loads so that one side of the beam-to-column connection was under negative moment and the other side under positive moment. The beam-to-column steelwork connections were made of bolted end plate with or without an extended haunch section. The columns were either bare steel or reinforced with doubler plate or partially encased with concrete. The moment-rotation relationships for the joints were obtained experimentally. Detailed test observations and results were reported. Analytical assessments of the ultimate moment and initial elastic stiffness of the joints tested are provided in the companion paper [


📜 SIMILAR VOLUMES


Numerical study of multiplanar tubular D
✍ S.P. Chiew; C.K. Soh; T.C. Fung; A.K. Soh 📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 232 KB

In this paper, 20 multiplanar DX-joints (double X) with in-plane braces and out-of-plane braces subjected to various combination of axial loads were analysed. The multiplanar eect of loaded and unloaded out-of-plane braces and the load-interaction of multiplanar DX-joints were investigated. The in¯u

Performance of timber buildings under se
✍ Frank Lam; Andre Filiatrault; Naohito Kawai; Shiro Nakajima; Nobuyoshi Yamaguchi 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 624 KB

## Abstract Several comprehensive research programmes were initiated recently in North America and Japan to improve our understanding of the seismic performance of timber buildings. A large database of experimental results and innovative modelling approaches were developed in these programmes. This