Blends of poly(viny1 methyl ketone) (PVMK) with poly(2-hydroxyethyl methacrylate) (PHEMA) and poly(epichlorohydrin) (PECH) were prepared by casting from a common solvent. It was found that all the PVMK blends are miscible and show a single, composition-dependent glass transition temperature (T,). Th
Completely miscible ternary blends—2. Poly(epichlorohydrin)-poly(methyl methacrylate)-poly(vinyl acetate)
✍ Scribed by Guo Qipeng
- Publisher
- Elsevier Science
- Year
- 1990
- Tongue
- English
- Weight
- 196 KB
- Volume
- 26
- Category
- Article
- ISSN
- 0014-3057
No coin nor oath required. For personal study only.
✦ Synopsis
Blends of poly(epichlorohydrin) (PECH) and poly(vinyl acetate) (PVAc) are shown to be completely miscible, based on the observation of a single glass transition temperature (Ts) by differential scanning calorimetry and lower critical solution temperature (LCST) behaviour. Miscibility of PECH with PVAc is presumably due to hydrogen-bonding interactions between the components. Since poly(methyl methacrylate) (PMMA) is known to form miscible binary blends with PECH and PVAC, the ternary system comprising PECH, PMMA and PVAc has been identified as one for which all three binary pairs are miscible. Examination of the ternary blends for T~ and LCST behaviour revealed that the ternary system exhibits LCST behaviour and complete miscibihty exists over the entire composition diagram for temperatures below the cloud point temperature.
📜 SIMILAR VOLUMES
The glass transition relaxations of different blends of poly(viny1 acetate) and poly(ethy1 methacrylate) have been investigated by dielectric relaxation spectroscopy in the frequency range from 20 Hz to 1 MHz. The obtained results suggest that the poly(viny1 acetate)-rich blends show immiscibility b
Miscibility in blends of poly(methyl methacrylate) (PMMA) with poly(vinyl acetate) (PVAc) has been studied by using differential scanning calorimetry and i.r. spectra techniques. PMMA is miscible with PVAc at all compositions. PMMA/PVAc blends show a lower critical solution temperature. The FTIR spe
The sorption and the transport of He, Ar, N,, CH,, and COP in miscible poly(methy1 acry-lateXPMA)/poly(epichlorohydrinKPECH) blends from 1 to 20 atm at 350C are reported. For He, Ar, N2, and CH,, the permeabilities and the diffusion time lags are independent of the upstream pressure, if the compacti