✦ LIBER ✦

Complete polyethylene wear-through and secondary breakage of the expansion cup in a ceramic-polyethylene total hip arthroplasty

✍ Scribed by Massimo Mariconda; Alessandro Silvestro; Gelsomina Mansueto; Domenico Marinò

Publisher: Springer
Year: 2009
Tongue: English
Weight: 288 KB
Volume: 130
Category: Article
ISSN: 1434-3916
DOI: 10.1007/s00402-009-0843-7

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The wear of a polyethylene socket articu

The wear of a polyethylene socket articulating with a zirconia ceramic femoral head in canine total hip arthroplasty

✍ Hamada, Yoshiki ;Horiuchi, Tadahiro ;Sano, Yayoi ;Usui, Ikuo 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 515 KB

Wear of yttria-zirconia (zirconia) in the femoral head was investigated in mature mongrel dogs weighing 10 to 13 kg. Two dogs, which were used as a control group, were sacrificed 18 months after implantation of the uncemented modular hip system with an alumina ceramic (alumina) femoral head. A zirco

Wear of ultra-high-molecular-weight poly

Wear of ultra-high-molecular-weight polyethylene cup articulating with 22.225 mm zirconia diameter head in cemented total hip arthroplasty

✍ Michael Wroblewski; Paul D. Siney; Hagime Nagai; Patricia A. Fleming 📂 Article 📅 2004 🏛 Springer Japan 🌐 English ⚖ 86 KB

Massive wear of a steel ball head by cer

Massive wear of a steel ball head by ceramic fragments in the polyethylene acetabular cup after revision of a total hip prosthesis with fractured ceramic ball

✍ I. Kempf; M. Semlitsch 📂 Article 📅 1990 🏛 Springer 🌐 English ⚖ 528 KB

Effect of slide track shape on the wear

Effect of slide track shape on the wear of ultra-high molecular weight polyethylene in a pin-on-disk wear simulation of total hip prosthesis

✍ Vesa Saikko; Olof Calonius; Jaakko Keränen 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 334 KB

## Abstract Prosthetic joints appear to show a strong relationship between the type of relative motion and wear, requiring careful consideration in the design of wear simulators. This relationship was studied with a 12‐station pin‐on‐disk device, specifically adapted for the wear simulation of pros