✦ LIBER ✦

Compatibility studies of sulfonated poly(ether ether ketone)–poly(ether imide)–polycarbonate ternary blends

✍ Scribed by Yong Sung Chun; Hyun Sung Kwon; Woo Nyon Kim; Ho Gyu Yoon

Publisher: John Wiley and Sons
Year: 2000
Tongue: English
Weight: 156 KB
Volume: 78
Category: Article
ISSN: 0021-8995
DOI: 10.1002/1097-4628(20001227)78:14<2488::aid-app80>3.0.co;2-t

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Miscibility and crystallization behavior

Miscibility and crystallization behavior of poly(ether ether ketone ketone)/poly(ether imide) blends

✍ Mitsuhiro Shibata; Zhijie Fang; Ryutoku Yosomiya 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 160 KB

Thermal properties of melt-blended poly(

Thermal properties of melt-blended poly(ether ether ketone) and poly(ether imide)

✍ Yong Sung Chun; Heon Sang Lee; Hyun Chul Jung; Woo Nyon Kim 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 135 KB 👁 2 views

The thermal properties of blends of poly(ether ether ketone) (PEEK) and poly(ether imide) (PEI) prepared by screw extrusion were investigated by differential scanning calorimetry. From the thermal analysis of amorphous PEEK-PEI blends which were obtained by quenching in liquid nitrogen, a single gla

Analysis and characterization of unusual

Analysis and characterization of unusual ternary polymer miscibility in poly(ether diphenyl ether ketone), poly(ether ether ketone), and poly(ether imide)

✍ E. M. Woo; Yi-Chern Tseng 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 162 KB 👁 1 views

Transmission electron microscopy studies

Transmission electron microscopy studies on selectively stained poly(aryl-ether-ether-ketone)/poly(ether-imide) semicrystalline blends

✍ D. A. Ivanov; P. D. M. Lipnik; A. M. Jonas 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 331 KB 👁 1 views

Biphasic compatible blends from injectio

Biphasic compatible blends from injection-molded poly(ether ether ketone)/polysulfone

✍ A. Arzak; J. I. Eguiazábal; J. Nazábal 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 255 KB 👁 1 views

Poly(ether ether ketone)/polysulfone blends were obtained by direct injection molding throughout the composition range. The almost full immiscibility and biphasic nature of these blends was seen by differential scanning calorimetry and dynamic-mechanical thermal analysis and their homogeneously disp

Synthesis and characterization of poly(e

Synthesis and characterization of poly(ether sulfone) and poly(ether sulfone ketone) copolymers

✍ V. Lakshmana Rao; P. U. Sabeena; M. Rama Rao; K. N. Ninan 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 165 KB 👁 2 views

Poly(ether sulfone) and poly(ether sulfone ketone) copolymers (I-V) were synthesized by the nucleophilic substitution reaction of 4,4Ј-dihydroxy diphenyl sulfone (DHDPS, A) with various mole proportions 4,4Ј-difluoro benzophenone (DFBP, B) and 4,4Ј-difluoro diphenyl sulfone (DFDPS, C) using sulfolan