✦ LIBER ✦

Comparison of three real time techniques for the measurement of dynamic fracture initiation toughness in metals

✍ Scribed by D.D. Anderson; A.J. Rosakis

Publisher: Elsevier Science
Year: 2005
Tongue: English
Weight: 661 KB
Volume: 72
Category: Article
ISSN: 0013-7944
DOI: 10.1016/j.engfracmech.2004.04.005

No coin nor oath required. For personal study only.

✦ Synopsis

Three techniques for measuring dynamic stress intensity factor time histories of dynamically loaded stationary mode-I cracks are compared as applied to dynamically loaded pre-cracked 6Al-4V titanium alloy specimens. The three techniques are crack opening displacement (COD), dynamic strain gage measurement, and coherent gradient sensing (CGS). The stress intensity factor histories are inferred from each measurement technique and are used to obtain the critical dynamic initiation toughness as a function of loading rate (K d Ic ð _ K d I Þ). There are significant differences in implementation and information obtained from each of the three measurement techniques, though for the tests performed all are found to yield very similar results.

📜 SIMILAR VOLUMES

Ophidian kidney preparation for the meas

Ophidian kidney preparation for the measurement of glomerular dynamics in real-time

✍ Stanley D. Yokota 📂 Article 📅 1990 🏛 Springer 🌐 English ⚖ 381 KB

A new ophidian kidney preparation is described which allows the measurement of glomerular arteriolar diameters, glomerular blood flow, and glomerular capillary pressure in real time. Intravital epifluorescence video microscopy is utilized to observe and record blood flow in the renal microcirculatio

State of the art of the measurement tech

State of the art of the measurement technique for signal analysis in real time

✍ B. A. Chuprakov; I. P. Krasnoshchekov 📂 Article 📅 1990 🏛 Springer US 🌐 English ⚖ 372 KB

Comparison of Experimental Techniques fo

Comparison of Experimental Techniques for the Measurement of Mixing Time in Gas-Liquid Systems

✍ D. Pinelli; W. Bujalski; A. W. Nienow; F. Magelli 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 168 KB 👁 2 views

A comparison of spectral and temporal te

A comparison of spectral and temporal techniques for the measurement of timing jitter and their application in a modelocked argon ion and dye laser system

✍ D. Henderson; A.G. Roddie 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 349 KB

Oxygen interaction of CdS-based gas sens

Oxygen interaction of CdS-based gas sensors with different stoichiometric compositions was studied by X-ray photoelectron spectroscopy (XPS) and thermal-desorption mass spectroscopy observations combined with conductivity measurements. Three different types of film with different atomic ratios of Cd/S were used in the study of oxygen chemisorption in a low-temperature range between 300 and 570 K. Spray pyrolysis was used for the deposition of the films on glass substrates; XPS and energy dispersive spectroscopy of X-ray together with atomic force microscopy and scanning electron microscopy were used for the characterization of the composition and structure of the films. It was possible to distinguish different temperature ranges for the thermal desorption of the different adsorbed oxygen species. A comparison of the data from XPS and mass-spectroscopy observations with conductance measurements allows to conclude that metallic surface atoms are responsible for different interactions of oxygen species with CdS surfaces.

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 379 KB