✦ LIBER ✦

Comparison of the physical properties of epoxy-based composites filled with different types of carbon nanotubes for aeronautic applications

✍ Scribed by Biagio De Vivo; Patrizia Lamberti; Vincenzo Tucci; Liberata Guadagno; Luigi Vertuccio; Vittoria Vittoria; Andrea Sorrentino

Book ID: 111992766
Publisher: John Wiley and Sons
Year: 2012
Tongue: English
Weight: 560 KB
Volume: 31
Category: Article
ISSN: 0730-6679
DOI: 10.1002/adv.21284

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of different carbon fillers on th

Effect of different carbon fillers on the properties of PP composites: Comparison of carbon black with multiwalled carbon nanotubes

✍ Zhen Zhou; Shifeng Wang; Yong Zhang; Yinxi Zhang 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 431 KB 👁 2 views

## Abstract Polypropylene (PP)/carbon composites were prepared via melt blending PP with carbon fillers, including multiwalled carbon nanotubes (MWNTs) and carbon black (CB). Field‐emission scanning electron microscopy was used to research the morphology and dispersion of fillers in the PP matrix.

Comparison of physical properties for ca

Comparison of physical properties for carbon nanotube doped MgB2 superconductors synthesized with different process

✍ Guoqiu Yuan; Xiaonong Xu; Zhihe Wang; Dingwei Lu; Xin Jin 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 453 KB

Carbon nanotubes (CNT) doping of magnesium diboride with a nominal stoichiometry of MgB 1.9 C 0.1 synthesized under ambient pressure (AP) and high pressure (HP) leads to an improvement in the critical current density J c and the upper critical field H c2 (T) with a slight depression in the supercond

Comparison of chemical vapor deposition

Comparison of chemical vapor deposition and chemical grafting for improving the mechanical properties of carbon fiber/epoxy composites with multi-wall carbon nanotubes

✍ Rong, Huaiping; Dahmen, Klaus-Hermann; Garmestani, Hamid; Yu, Muhuo; Jacob, Karl 📂 Article 📅 2013 🏛 Springer 🌐 English ⚖ 795 KB

Oxygen interaction of CdS-based gas sens

Oxygen interaction of CdS-based gas sensors with different stoichiometric compositions was studied by X-ray photoelectron spectroscopy (XPS) and thermal-desorption mass spectroscopy observations combined with conductivity measurements. Three different types of film with different atomic ratios of Cd/S were used in the study of oxygen chemisorption in a low-temperature range between 300 and 570 K. Spray pyrolysis was used for the deposition of the films on glass substrates; XPS and energy dispersive spectroscopy of X-ray together with atomic force microscopy and scanning electron microscopy were used for the characterization of the composition and structure of the films. It was possible to distinguish different temperature ranges for the thermal desorption of the different adsorbed oxygen species. A comparison of the data from XPS and mass-spectroscopy observations with conductance measurements allows to conclude that metallic surface atoms are responsible for different interactions of oxygen species with CdS surfaces.

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 379 KB