𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Comparison of maleic anhydride grafting onto powder and granular polypropylene in the melt by reactive extrusion

✍ Scribed by Yılser Güldoğan; Sinan Eğri; Zakir M. O. Rzaev; Erhan Pişkin

Publisher
John Wiley and Sons
Year
2004
Tongue
English
Weight
150 KB
Volume
92
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Grafting of maleic anhydride onto polypr
Grafting of maleic anhydride onto polypropylene by reactive processing. I. Effect of maleic anhydride and peroxide concentrations on the reaction
✍ S. H. P. Bettini; J. A. M. Agnelli 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 194 KB 👁 2 views

Grafting reactions were performed in a Haake torque rheometer, according to a central composite experimental design, where the maleic anhydride and peroxide concentrations, rotor speed, and reaction time were varied. The 27 formulations were analyzed by Fourier transformed infrared spectroscopy and

Grafting of maleic anhydride onto polypr
Grafting of maleic anhydride onto polypropylene by reactive processing. II. Effect of rotor speed and reaction time
✍ S. H. P. Bettini; J. A. M. Agnelli 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 223 KB 👁 1 views

Grafting of maleic anhydride onto polypropylene was performed in a Haake torque rheometer, according to a central composite experimental design, in which four factors were varied: the maleic anhydride and peroxide concentrations, rotor speed, and reaction time. The current article investigates the e

Parameters affecting the free-radical me
Parameters affecting the free-radical melt grafting of maleic anhydride onto linear low-density polyethylene in an internal mixer
✍ M. K. Razavi Aghjeh; H. Nazockdast; H. Assempour 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 162 KB 👁 1 views

## Abstract Our main objective of this study was to study the parameters affecting the free‐radical melt grafting of maleic anhydride (MA) onto linear low‐density polyethylene (LLDPE) with dicumyl peroxide (DCP) in an internal mixer. The degree of grafting (DG) was measured with titrometry and Four

Modification of acrylonitrile–butadiene–
Modification of acrylonitrile–butadiene–styrene terpolymer by grafting with maleic anhydride in the melt. I. Preparation and characterization
✍ Rongrong Qi; Junling Qian; Chixing Zhou 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 93 KB 👁 1 views

## Abstract The graft copolymerization of maleic anhydride (MAH) onto acrylonitrile–butadiene–styrene terpolymer (ABS) was carried out with dicumyl peroxide (DCP) and benzoyl peroxide (BPO) as the binary initiators and with styrene as the comonomer in the molten state. IR spectra confirmed that MAH

Modification of acrylonitrile-butadiene-
Modification of acrylonitrile-butadiene-styrene terpolymer by graft copolymerization with maleic anhydride in the melt. II. Properties and phase behavior
✍ Rongrong Qi; Junling Qian; Zhefeng Chen; Xing Jin; Chixing Zhou 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 187 KB 👁 1 views

## Abstract The graft copolymerization of maleic anhydride (MAH) onto acrylonitrile‐butadiene‐styrene terpolymer (ABS) using dicumyl peroxide and benzoyl peroxide as the binary initiator and styrene as the comonomer in the molten state was described. The properties and phase morphologies of the mod