Hydrogenation
of a Spanish lignite of 12% sulphur content was conducted using three molybdenum-containing catalysts impregnated into the lignite: ammonium tetrathiomolybdate, a sulphided ammonium heptamolybdate, and molybdenum disulphide. The conversions to liquids and hydrodesulphurization were investigated for a series of residence times and temperatures. At 275"C, the ammonium salts provide no greater conversion or sulphur removal than obtained in the absence of catalyst, because these salts have not decomposed to an active catalyst at this temperature. However, lignite impregnated with molybdenum disulphide does experience greater conversion and desulphurization than lignite reacted without catalyst. At 325"C, the lignite impregnated with the ammonium salts gives conversions and desulphurization substantially superior to that achieved with molybdenum disulphide or without catalyst. This is attributed to the superior dispersion that can be achieved by impregnation using a solution of a soluble salt rather than a slurry of the insoluble disulphide. The best conversions, liquid yield, and desulphurization are achieved using impregnated sulphided ammonium heptamolybdate.