## Abstract A novel ultra‐wideband design of a printed fork‐shaped monopole antenna with a band‐rejection characteristic is presented. The proposed antenna with a simpler structure has a larger impedance bandwidth, defined by voltage standing wave ratio ≤ 2, covering the range from 3.09 to 11 GHz,
Compact ultra-wideband printed antenna with band-rejection characteristic
✍ Scribed by Choi, W.; Chung, K.; Jung, J.; Choi, J.
- Book ID
- 118116161
- Publisher
- The Institution of Electrical Engineers
- Year
- 2005
- Tongue
- English
- Weight
- 357 KB
- Volume
- 41
- Category
- Article
- ISSN
- 0013-5194
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract A novel and compact ultra‐wideband (UWB) printed monopole antenna with extended band‐notched designs is presented. The antenna with a total size of 20 mm × 35 mm operates in a band from 3 to over 11 GHz (VSWR ≤ 2), and shows omnidirectional radiation with a low cross‐polarization in the
## Abstract A compact printed ultra‐wideband (UWB, 3.1–10.6 GHz) circular‐slot antenna with a notched frequency band at 5 GHz is presented. The antenna is a uniplanar structure and occupies a compact area of 25 × 26 mm^2^ only (the side length is less than 27% of the lower edge frequency at 3.1 GHz
## Abstract In this article, a novel printed ultra‐wideband (UWB) antenna with band stop characteristics is proposed. The proposed antenna is a simple U‐shaped monopole structure where a rectangular strip is placed on both sides at the top of semi annular ring monopole structure. The band rejection
## Abstract A compact and simple design of a printed antenna for ultra‐wideband (UWB) application with band‐notch characteristics are presented.The antenna size is 30 × 36 × 0.4 mm^3^ and operates over an extremely wide band of 2.82–13.95 GHz. The desired band‐notched UWB operation can be obtained