𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Compact lowpass filter with wide stopband using modified semi-elliptic and semi-circular microstrip patch resonator

✍ Scribed by Hayati, M.; Sheikhi, A.; Lotfi, A.

Book ID
118178645
Publisher
The Institution of Electrical Engineers
Year
2010
Tongue
English
Weight
211 KB
Volume
46
Category
Article
ISSN
0013-5194

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Wide stopband compact microstrip lowpass
Wide stopband compact microstrip lowpass filter using circular ring resonator and split ring resonators
✍ Mahdi Naghshvarian Jahromi πŸ“‚ Article πŸ“… 2011 πŸ› John Wiley and Sons 🌐 English βš– 489 KB

## Abstract In this contribution, a microstrip low‐pass filter with a wide stop‐band using split ring resonators and a circular ring resonator is introduced. The passband ripple of proposed filter was measured 0.6 dB and minimum insertion loss of passband is about 0.75 dB at 0.5 GHz frequency. More

Compact wide stopband low-pass filter us
Compact wide stopband low-pass filter using rectangular patch compact microstrip resonant cell and defected ground structure
✍ Santanu Dwari; Subrata Sanyal πŸ“‚ Article πŸ“… 2007 πŸ› John Wiley and Sons 🌐 English βš– 187 KB

## Abstract A new compact microstrip low‐pass filter (LPF) is presented using a novel rectangular patch compact microstrip resonant cell (RPCMRC) and square‐head defected ground structure (DGS). It exhibits wide, high stopband, and sharp rejection. A demonstration LPF having 3 dB cutoff frequency o

Compact microstrip low-pass filter using
Compact microstrip low-pass filter using complementary split ring resonators with ultra-wide stopband and high selectivity
✍ Hui-Yong Zeng; Guang-Ming Wang; Chen-Xin Zhang; Li Zhu πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 196 KB

## Abstract The transmission characteristic of the microstrip with complementary split ring resonator (CSRR) is researched. Compared with the conventional structure, this filter can achieve a wider bandgap by shifting the gap of CSRR from the side of the microstrip to the underside. And then, a low