𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Compact frequency and bandwidth tunable stopband filters using split ring resonators and varactors coupled transmission line

✍ Scribed by Kim, Cheolbok; Cheng, Xiaoyu; Senior, David E.; Yoon, Yong-Kyu

Book ID
119183245
Publisher
Elsevier Science
Year
2012
Tongue
English
Weight
968 KB
Volume
66
Category
Article
ISSN
1434-8411

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Wide stopband compact microstrip lowpass
Wide stopband compact microstrip lowpass filter using circular ring resonator and split ring resonators
✍ Mahdi Naghshvarian Jahromi πŸ“‚ Article πŸ“… 2011 πŸ› John Wiley and Sons 🌐 English βš– 489 KB

## Abstract In this contribution, a microstrip low‐pass filter with a wide stop‐band using split ring resonators and a circular ring resonator is introduced. The passband ripple of proposed filter was measured 0.6 dB and minimum insertion loss of passband is about 0.75 dB at 0.5 GHz frequency. More

Compact, deep, and wide rejection bandwi
Compact, deep, and wide rejection bandwidth low-pass filter using open complementary split ring resonator
✍ S. S. Karthikeyan; Rakhesh S. Kshetrimayum πŸ“‚ Article πŸ“… 2011 πŸ› John Wiley and Sons 🌐 English βš– 390 KB

## Abstract A deep and wide rejection bandwidth, sharp cutoff and compact low‐pass filter design using open complementary split ring resonator (OCSRR), and open stub is presented in this article.OCSRR is counterpart of the open split ring resonator. The proposed low‐pass filter consist of two OCSRR

Compact microstrip low-pass filter using
Compact microstrip low-pass filter using complementary split ring resonators with ultra-wide stopband and high selectivity
✍ Hui-Yong Zeng; Guang-Ming Wang; Chen-Xin Zhang; Li Zhu πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 196 KB

## Abstract The transmission characteristic of the microstrip with complementary split ring resonator (CSRR) is researched. Compared with the conventional structure, this filter can achieve a wider bandgap by shifting the gap of CSRR from the side of the microstrip to the underside. And then, a low