✦ LIBER ✦

Compact DMFC assembly and its manufacture

Publisher: Elsevier Science
Year: 2002
Tongue: English
Weight: 158 KB
Volume: 2002
Category: Article
ISSN: 1464-2859
DOI: 10.1016/s1464-2859(02)80498-9

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Manufacture of Robust Catalyst Layers fo

Manufacture of Robust Catalyst Layers for the DMFC

✍ M. Schonert; K. Jakoby; C. Schlumbohm; A. Glüsen; J. Mergel; D. Stolten 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 228 KB 👁 1 views

## Abstract Catalyst layers for direct methanol fuel cells (DMFC) must possess a complex structure in order to provide protonic and electronic conductivity as well as access to reactants at all reactive sites. This involves a highly porous structure, which is often mechanically instable, especially

Seal assembly and method of manufacture

📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 118 KB

Hermetic glass-to-metal seal assembly an

Hermetic glass-to-metal seal assembly and method of manufacturing it

📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 230 KB

not covered in any detail. This would presumably limit the temperature range of this device. The effect that temperature variations have on the pressure in the hydraulic circuit -when the pressure is locked in -is also not covered. This latter factor could cause very significant pressure variations.

Graphite: its formation and manufacture

✍ E.G. Acheson 📂 Article 📅 1899 🏛 Elsevier Science 🌐 English ⚖ 617 KB

Fuel cell and its manufacture

📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 138 KB

Here the MCFC electrode support is constructed from a high-porosity reticulated foam on the face of the anode or the cathode facing away from the electrolyte matrix, to form multiple pores. The

Brush seal assembly, method of manufactu

Brush seal assembly, method of manufacture and use

📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 223 KB