✦ LIBER ✦

Cobalt-Chromium and Nickel-Chromium Alloys for Removable Prosthodontics, Part 1: Mechanical Properties

✍ Scribed by David A. Bridgeport; William A. Brantley; Paul F. Herman

Book ID: 109133597
Publisher: John Wiley and Sons
Year: 1993
Tongue: English
Weight: 694 KB
Volume: 2
Category: Article
ISSN: 1059-941X
DOI: 10.1111/j.1532-849x.1993.tb00398.x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Cyclic fatigue properties of cobalt-chro

Cyclic fatigue properties of cobalt-chromium alloy clasps for partial removable dental prostheses

✍ Hui Cheng; Minrui Xu; Hai Zhang; Weiqing Wu; Ming Zheng; Xiurong Li 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 671 KB

On a tantalum and silicon strengthened c

On a tantalum and silicon strengthened chromiumiron alloy part 2 — Mechanical properties

✍ I. Amato; G. Bollani; P.G. Cappelli 📂 Article 📅 1975 🏛 Elsevier Science ⚖ 682 KB

Corrosion of metals and alloys in molten

Corrosion of metals and alloys in molten glasses. Part 2: nickel and cobalt high chromium superalloys behaviour and protection

✍ J Di Martino; C Rapin; P Berthod; R Podor; P Steinmetz 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 538 KB

On a tantalum and silicon strengthened c

On a tantalum and silicon strengthened chromiumiron alloy part 1 — Metallurgical properties

✍ I. Amato; V. Baffigo; P.G. Cappelli 📂 Article 📅 1975 🏛 Elsevier Science ⚖ 799 KB

Corrosion properties of soldered joints.

Corrosion properties of soldered joints. Part I: Electrochemical action of dental solder and dental nickel-chromium alloy

✍ Naofumi Shigeto; Toshiyuki Yanagihara; Taizo Hamada; Ejvind Budtz-Jørgensen 📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 374 KB

Biocompatibility and mechanical properti

Biocompatibility and mechanical properties of diamond-like coatings on cobalt-chromium-molybdenum steel and titanium-aluminum-vanadium biomedical alloys

✍ C. Hinüber; C. Kleemann; R. J. Friederichs; L. Haubold; H. J. Scheibe; T. Schuel 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 800 KB

## Abstract Diamond‐like carbon (DLC) films are favored for wear components because of diamond‐like hardness, low friction, low wear, and high corrosion resistance (Schultz et al., Mat‐wiss u Werkstofftech 2004;35:924–928; Lappalainen et al., J Biomed Mater Res B Appl Biomater 2003;66B:410–413; Tia