✦ LIBER ✦

Coarsening of Al3Sc precipitates in an Al-0.28 wt pct Sc alloy

✍ Scribed by C. Watanabe; T. Kondo; R. Monzen

Book ID: 107440620
Publisher: The Minerals, Metals & Materials Society
Year: 2004
Tongue: English
Weight: 194 KB
Volume: 35
Category: Article
ISSN: 1073-5623
DOI: 10.1007/s11661-004-0247-9

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Precipitation of (Al,Si)3Sc in an Al–Sc–

Precipitation of (Al,Si)3Sc in an Al–Sc–Si alloy

✍ Gang Du; Jingwei Deng; Yongli Wang; Desheng Yan; Lijian Rong 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 313 KB

Kinetics and mechanisms of precipitation

Kinetics and mechanisms of precipitation in an Al–0.2 wt.% Sc alloy

✍ Jostein Røyset; Nils Ryum 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 878 KB

Nanoscale structural evolution of Al3Sc

Nanoscale structural evolution of Al3Sc precipitates in Al(Sc) alloys

✍ E.A Marquis; D.N Seidman 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 725 KB

The coarsening process of Ge precipitate

The coarsening process of Ge precipitates in an Al–4 wt.% Ge alloy

✍ G.H. Deaf 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 330 KB

Modeling the effect of Al3Sc precipitate

Modeling the effect of Al3Sc precipitates on the yield stress and work hardening of an Al–Mg–Sc alloy

✍ F. Fazeli; W.J. Poole; C.W. Sinclair 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 454 KB

The yield stress and work hardening behaviour of precipitation hardening alloys is directly related to the nature of the interaction between mobile dislocations and precipitates. In commercial systems such as aluminium alloys, the understanding of this problem is complicated by the overlap between v

Rapid precipitation of dispersoids durin

Rapid precipitation of dispersoids during extrusion of an Al–0.91 wt.% Mn–0.13 wt.% Zr–0.17 wt.% Sc-alloy

✍ B. Forbord; L. Auran; W. Lefebvre; H. Hallem; K. Marthinsen 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 439 KB

Dispersoids are usually formed during precipitation annealing (homogenisation) of aluminium alloys in order to inhibit recrystallisation during subsequent processing and/or use at high temperatures. In this respect, Al 3 (Sc x ,Zr 1-x )-dispersoids are most efficient, as they display the unique comb