𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Coal gasification replaces use of natural gas


Publisher
Elsevier Science
Year
2002
Weight
169 KB
Volume
43
Category
Article
ISSN
0140-6701

No coin nor oath required. For personal study only.

✦ Synopsis


03 Gaseous fuels (derived gaseous fuek) non-wetting phase relative permeability was observed in Elgin sandstone (Elgin SS), whereas an increase was observed in Okesa sandstone (Okesa SS) at the same polymer concentration.

An attempt was made to determine if these differences are due to the distribution of clays in the pores and to their interaction with the adsorbed polymer. The results of this study provide useful insights into the interaction of adsorbed polymer with clays and the resultant effects on relative permeability curves. This study also suggests a useful way of using centrifuge date to study the effects of polymer treatment on capillary pressure characteristics of porous rocks.


πŸ“œ SIMILAR VOLUMES


Sasol to replace coal by natural gas
πŸ“‚ Article πŸ“… 2002 πŸ› Elsevier Science βš– 31 KB

oil and gas sector and ammonia and methanol production. However, Synetix also produces enzymes for fine chemicals manufacture. Johnson Matthey mainly supplies precious metal catalysts. It wants to remain focused on high added-value and high technology catalysts.

99/02510 First experience with gasβ€”steam
πŸ“‚ Article πŸ“… 1999 πŸ› Elsevier Science βš– 207 KB

03 Gaseous fuels (derived gaseous fuels) undesirable atmospheric pollutants. In the same way, the efficiency of integrated gasification molten carbonate fuel cell (IGFC) power plants remains unaffected by ammonia, but nitrogen oxide is generated during 99iQ2502 combustion of the anode exhaust gas.

Catalytic gasification of gas-coal char
✍ Shufen Li; Yuanlin Cheng πŸ“‚ Article πŸ“… 1995 πŸ› Elsevier Science 🌐 English βš– 335 KB

CO, gasification of a gas-coal char catalysed by Na,C03 and K&O, was studied using a fixed-bed reactor at 79S102o"C and 0.2 MPa. The gasification rate increased with increasing temperature. With increasing addition of Na2C03 in the range 9-25 wt% and K&O, in the range 5-20 wt% the rate increased sha