This patent covers a bearing with an IC tag (9), which is capable of preventing obstruction such as radio wave reflection and absorption caused by raceway rings etc. The IC tag uses the metal casing of the bearing seal as an antenna so that tag can be reduced in size and increased in capacity.
Closure and package with induction seal and RFID tag
- Publisher
- Elsevier Science
- Year
- 2008
- Tongue
- English
- Weight
- 84 KB
- Volume
- 2008
- Category
- Article
- ISSN
- 1350-4789
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
This patent covers a bearing with an IC tag (9), which is capable of preventing obstruction such as radio wave reflection and absorption caused by raceway rings etc. The IC tag uses the metal casing of the bearing seal as an antenna so that tag can be reduced in size and increased in capacity.
This patent describes the manufacture of a seal with graded properties that may be used as the bearing seal in a down-hole rock bit. A property gradient is formed in a seal, or a section of the seal, from the exterior surface inwards without changing the seal composition.
## Abstract A design concept and some examples of antennas suitable for batteryโassisted radio frequency identification (RFID) tag with a thin and flexible film battery are presented. For the antenna design of this kind of a batteryโassisted RFID tag, a special caution is necessary considering the
## Abstract A novel lowโprofile (โ0.01ฮป) platformโtolerant passive RFID tag incorporated with artificial magnetic conductor (AMC) is proposed in this letter. It consists of a modified dipole antenna combined with an AMC ground plane and a tag chip attached on the feeding point of the antenna. The p
## Abstract A novel planar loop tag antenna mounted on the plastic pallets for ultraโhigh frequency (UHF) radio frequency identification (RFID) system is proposed. By insetting the Uโshaped slot and a pair of rectangular parasitic strips into the proposed loop tag antenna, the resonant mode close t