Two coal flotation concentrates were dewatered by electroosmosis in small-scale laboratory tests to 84 and 88 wt% solids at an enerav consumotion of 25 and 69 kW h/dry tonne, respectively. Vacuum filtration at the washeries yielded 70-75 &t% solids.
Classification and dewatering of fine coal concentrates
- Publisher
- Elsevier Science
- Year
- 2002
- Weight
- 173 KB
- Volume
- 43
- Category
- Article
- ISSN
- 0140-6701
No coin nor oath required. For personal study only.
โฆ Synopsis
0 1 Solid fuels (preparation) compared to the use of water-only for the treatment of an easy-to-clean Illinois No. 6 fine coal sample. For a difficult-to-clean coal, the mass yield improvement was significantly greater at nearly 20% by wt. From the treatment of four different coal samples, organic efficiency values greater than 90% were obtained over the entire range of product quality values. These findings are reflective of the highly efficiency, low density separations provided by the sense-medium as indicated by probable error values below 0.05.
02/00078
Application of petroleum-coke fines for preparation of blast-furnace coke Pishnograev, S.N. Ed al. St&, 1999, 11, 7-9. (In Russian) Petroleum-coke fines containing 0.29-0.4% ash and 2.3-2.6% S were evaluated as an additive in the manufacture of lump coal-derived coke for blast-furnace smelting of Fe ores. Addition of the low-cash petroleum coke fines decreased the ash content of the smelting coke, but increased the S-impurity content in the coke and in the molten pig iron product. The optimized addition of 5% fines did not require major changes in the coke manufacture or Fe-ore smelting.
๐ SIMILAR VOLUMES
Liquid fuels (derived liquid fuels) turing economics are reviewed, but the ultimate profitability of gas to hydrocarbon systems at 25ยฐC. The calculated data and experimental data liquids projects is left to the individual investor to decide, as it is their were very similar. The equation of molecula
Water is a necessary medium in most coal preparation processes, but its presence in the final product has a negative impact on transporation costs, handling and specific energy value. A major contribution to the total moisture content may be attributed to the proportion of fine coal in the total pro