✦ LIBER ✦

Choosing the place for cutting specimens for impact bending tests of reinforcing steel

✍ Scribed by Ts. Monkhzhargal; S. Dorzhkhand; S. Vanchinzhav; Ya. Duinkherzhav

Publisher: Springer US
Year: 2006
Tongue: English
Weight: 108 KB
Volume: 48
Category: Article
ISSN: 0026-0673
DOI: 10.1007/s11041-006-0036-8

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Fundamental principles for choosing stee

Fundamental principles for choosing steels on the basis of results of wear tests

✍ G. M. Sorokin; S. N. Bobrov 📂 Article 📅 1998 🏛 Springer US 🌐 English ⚖ 253 KB

Testing machine for study of the kinetic

Testing machine for study of the kinetics of fatigue cracking in pure-bending specimens

✍ V. V. Panasyuk; L. V. Ratych; I. N. Dmytrakh 📂 Article 📅 1979 🏛 Springer 🌐 English ⚖ 354 KB

Contribution to the problem of tensile a

Contribution to the problem of tensile and bending-test method for SiC-fibre-reinforced glass

✍ Th. Klug; J. Reichert; R. Brückner 📂 Article 📅 1993 🏛 Springer 🌐 English ⚖ 368 KB

Determination of the minimum quantity of

Determination of the minimum quantity of irradiated ferritic steel specimens for small punch DBTT testing

✍ T. Misawa; K. Suzuki; M. Saito; Y. Hamaguchi 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 395 KB

Machine for fatigue testing of specimens

Machine for fatigue testing of specimens and parts with variation of the bending moment, torque, and shearing force

✍ É. Ya. Filatov; V. É. Pavlovskii; V. N. Belokurov; G. M. Ruzina 📂 Article 📅 1989 🏛 Springer US 🌐 English ⚖ 663 KB

Short-beam and three-point-bending tests

Short-beam and three-point-bending tests for the study of shear and flexural properties in unidirectional-fiber-reinforced epoxy composites

✍ E. Sideridis; G. A. Papadopoulos 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 235 KB 👁 2 views

## Abstract The bending properties of composite materials are often characterized with simply supported beams under concentrated loads. The results from such tests are commonly based on homogeneous beam equations. For laminated materials, however, these formulas must be modified to account for the