𝔖 Bobbio Scriptorium
✦   LIBER   ✦

ChemInform Abstract: Positive Electrode Materials for Li-Ion and Li-Batteries

✍ Scribed by Brian L. Ellis; Kyu Tae Lee; Linda F. Nazar

Publisher
John Wiley and Sons
Year
2010
Weight
15 KB
Volume
41
Category
Article
ISSN
0931-7597

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Dichalcogenide Nanotube Electrodes for L
Dichalcogenide Nanotube Electrodes for Li-Ion Batteries
✍ R. Dominko; D. Arčon; A. Mrzel; A. Zorko; P. Cevc; P. Venturini; M. Gaberscek; M πŸ“‚ Article πŸ“… 2002 πŸ› John Wiley and Sons 🌐 English βš– 151 KB πŸ‘ 1 views

route [23]. After heating at 120 C for 2 days and then sintering at 750 C for 4 h, these plates were cut into small sections, which were then sintered at 900 C for 12 h to decrease the sizes of the voids. The 1.5 mm thick plates were infiltrated with nickel (ca. 100 lm) using the previously describe

The Layered Intercalation Compounds Li(M
The Layered Intercalation Compounds Li(Mn1βˆ’yCoy)O2: Positive Electrode Materials for Lithium–Ion Batteries
✍ A.Robert Armstrong; Alastair D Robertson; Robert Gitzendanner; Peter G Bruce πŸ“‚ Article πŸ“… 1999 πŸ› Elsevier Science 🌐 English βš– 193 KB

The layered intercalation compounds Li(Mn 1؊y Co y )O 2 ; 04y40.5 cannot be prepared by conventional solid state reaction but have been synthesized using a solution-based route coupled with ion exchange. A continuous range of solid solutions with rhombohedral symmetry exists for 0.14y40.5. Considera