Chemically-induced stresses in gadolinium-doped ceria solid oxide fuel cell electrolytes
β Scribed by A. Atkinson
- Publisher
- Elsevier Science
- Year
- 1997
- Tongue
- English
- Weight
- 833 KB
- Volume
- 95
- Category
- Article
- ISSN
- 0167-2738
No coin nor oath required. For personal study only.
β¦ Synopsis
Cerium oxide doped with gadolinium is an attractive electrolyte material for solid oxide fuel cells (SOFCs) operating in the temperature range 500-800Β°C. Under the low oxygen activity conditions of the SOFC anode the ceria is partially reduced and its lattice parameter increases leading to the generation of stress in the electrolyte. These stresses have been calculated for a range of different parameters (Gd doping level, temperature, oxygen activity and cell current) and for different geometrical configurations of an initially planar electrolyte membrane (self-supported or supported on a porous substrate).
The calculations show how the maximum tensile stresses are related to the non-stoichiometry of the electrolyte. The calculations also show that self supporting planar electrolytes should be allowed to relax by bending in order to minimise the risk of fracture and that supported electrolytes should be made as thin as possible. The calculations indicate that the maximum 'safe' operating temperature for Ce,,Gd,,O,.,_, at an anode oxygen activity of 10~20 is about 750Β°C. The limitations of assumptions made in the calculations are discussed.
π SIMILAR VOLUMES
## Abstract The application of the electrophoretic deposition (EPD) technique to the preparation of dense La~0.8~Sr~0.2~Ga~0.8~Mg~0.2~O~2.8~ (LSGM) electrolyte films for intermediate temperature solid oxide fuel cells (ITβSOFCs) was investigated. Suspensions of LSGM were prepared in acetoneβ+βI~2~β