✦ LIBER ✦

Characterization of the fracture toughness property (G1c) of composite laminates using the double cantilever beam specimen

✍ Scribed by S. Lee; P. C. Gaudert; R. C. Dainty; R. F. Scott

Publisher: Society for Plastic Engineers
Year: 1989
Tongue: English
Weight: 860 KB
Volume: 10
Category: Article
ISSN: 0272-8397
DOI: 10.1002/pc.750100506

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Evaluation of fracture energy GIC using

Evaluation of fracture energy GIC using a double cantilever beam fibre composite specimen

✍ B. Nageswara Rao; A.R. Acharya 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 322 KB

Akstraet--Studies are made to determine the mode I interlaminar fracture toughness, or critical energy release rate, Gtc of composites using a slender double cantilever beam (DCB) specimen. Fracture analysis has been carried out on DCB specimens made of carbon-fibre/PEEK and carbon-fibre/epoxy compo

Elastostatics of the orthotropic double-

Elastostatics of the orthotropic double-cantilever-beam fracture specimen

✍ H. G. Georgiadis; G. A. Papadopoulos 📂 Article 📅 1990 🏛 Springer 🌐 English ⚖ 496 KB

Analysis of a mixed mode fracture specim

Analysis of a mixed mode fracture specimen: the asymmetric double cantilever beam

✍ F. Xiao; C.-Y. Hui; E. J. Kramer 📂 Article 📅 1993 🏛 Springer 🌐 English ⚖ 938 KB

An asymmetric double cantilever beam (ADCB) is a simple but effective specimen for the measurement of polymer/polymer and polymer/non-polymer bimaterial interface fracture toughness. In order to characterize fully the bimaterial interface strength, and to control the crack trajectory, the critical e

Quasi-non-linear fracture mechanics anal

Quasi-non-linear fracture mechanics analysis of the double cantilever beam specimen

✍ Jørgen Lauritzen Jensen 📂 Article 📅 2005 🏛 Springer 🌐 English ⚖ 517 KB

A study of the effect of geometry on the

A study of the effect of geometry on the mode I interlaminar fracture toughness; measured by width tapered double cantilever beam specimen

✍ Zhiyun Li; Jiang Zhou; Mengxian Ding; Tianbai He 📂 Article 📅 1996 🏛 Springer 🌐 English ⚖ 204 KB

Shear and crack tip deformation correcti

Shear and crack tip deformation correction for the double cantilever beam and three-point end-notched flexure specimens for mode I and mode II fracture toughness measurement of wood

✍ Hiroshi Yoshihara; Akihiko Satoh 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 704 KB

Using specimens of western hemlock with various depths, double cantilever beam and three-point bend end-notched flexure tests were conducted to obtain the mode I and mode II fracture toughness. To correct the deflection caused by shearing and crack tip deformation, four conventional data reduction m