Characterization of random and multiblock copolymers of highly sulfonated poly(arylene ether sulfone) for a proton-exchange membrane
✍ Scribed by Cui Liang; Tatsuo Maruyama; Yoshikage Ohmukai; Tomohiro Sotani; Hideto Matsuyama
- Publisher
- John Wiley and Sons
- Year
- 2009
- Tongue
- English
- Weight
- 544 KB
- Volume
- 114
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Random and multiblock copolymers of sulfonated poly(arylene ether sulfone) (SPAES) were synthesized and characterized to compare the differences in the properties of proton‐exchange membranes made with random and multiblock SPAES copolymers. Atomic force microscopy observations and small‐angle X‐ray scattering measurements suggested the presence of nanoscale, clusterlike structures in the multiblock SPAES copolymers but not in the random SPAES copolymers. Proton‐exchange membranes were prepared from random and multiblock copolymers with various ion‐exchange capacities (IECs). The water uptake, proton conductivity, and methanol permeability of the SPAES membranes depended on the IECs of the random and multiblock SPAES copolymers. At the same IEC, the multiblock SPAES copolymers exhibited higher performances with respect to proton conductivity and proton/methanol permeation selectivity than the random SPAES copolymers. The higher performances of the multiblock SPAES copolymers were thought to be due to their clusterlike structure, which was similar to the ionic cluster of a Nafion membrane. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009
📜 SIMILAR VOLUMES
## Abstract Novel aromatic sulfonated poly(ether ether sulfone)s (SPEESs) with __tert__‐butyl groups were synthesized by aromatic nucleophilic polycondensation of disodium 3,3′‐disulfonate‐4,4′‐dichlorodiphenylsulfone (SDCDPS), 4,4′‐dichlorodiphenylsulfone (DCDPS), and __tert__‐butylhydroquinone (T
## Abstract A series of sulfonated poly(ether sulfone ether ketone ketone) (SPESEKK) with different degree of sulfonation (DS) are prepared by the postsulfonation of PESEKK using chlorosulfonic acid as sulfonating agent and concentrated sulfuric acid as solvent. The chemical structures of the polym
Novel multiblock poly(arylene ether sulfone)s were prepared by a two-pot method from a phenoxide-end-capped fully disulfonated poly(arylene ether sulfone) oligomer and a fluoride-end-capped nonsulfonated poly(arylene ether sulfone) oligomer with block length of 10 as the hydrophilic and hydrophobic
## Abstract Novel bisphenol A‐based sulfonated poly(arylene ether sulfone) (bi A‐SPAES) copolymers were successfully synthesized via direct copolymerization of disodium 3,3′‐disulfonate‐4,4′‐dichlorodiphenylsulfone, 4,4′‐dichlorodiphenylsulfone, and bisphenol A. The copolymer structure was confirme