𝔖 Bobbio Scriptorium

✦ LIBER ✦

Characterization of PM-PEMS for in-use measurements conducted during validation testing for the PM-PEMS measurement allowance program

✍ Scribed by M. Yusuf Khan; Kent C. Johnson; Thomas D. Durbin; Heejung Jung; David R. Cocker III; Dipak Bishnu; Robert Giannelli

Book ID: 113481072
Publisher: Elsevier Science
Year: 2012
Tongue: English
Weight: 454 KB
Volume: 55
Category: Article
ISSN: 1352-2310
DOI: 10.1016/j.atmosenv.2012.03.004

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Historical Perspective on the Developmen

Historical Perspective on the Development of Procedures for Conducting On-site Toxicity Tests and for Measuring Concentrations of Lampricides in the Sea Lamprey Control Program During 1957 to 1999

✍ David A. Johnson; Brian E. Stephens 📂 Article 📅 2003 🏛 Elsevier 🌐 English ⚖ 137 KB

Oxygen interaction of CdS-based gas sens

Oxygen interaction of CdS-based gas sensors with different stoichiometric compositions was studied by X-ray photoelectron spectroscopy (XPS) and thermal-desorption mass spectroscopy observations combined with conductivity measurements. Three different types of film with different atomic ratios of Cd/S were used in the study of oxygen chemisorption in a low-temperature range between 300 and 570 K. Spray pyrolysis was used for the deposition of the films on glass substrates; XPS and energy dispersive spectroscopy of X-ray together with atomic force microscopy and scanning electron microscopy were used for the characterization of the composition and structure of the films. It was possible to distinguish different temperature ranges for the thermal desorption of the different adsorbed oxygen species. A comparison of the data from XPS and mass-spectroscopy observations with conductance measurements allows to conclude that metallic surface atoms are responsible for different interactions of oxygen species with CdS surfaces.

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 379 KB

An innovative method for estimating the

An innovative method for estimating the roll angle in two-wheeled vehicles is proposed. the roll angle is a crucial variable in the dynamics of two-wheeled vehicles, since it greatly affects the behaviour of the tire-road contact forces. hence, the capability of providing in real time a reliable measure of such quantity allows us to evaluate the dynamic properties of the vehicle and its tyres, and represents the enabling technology for the design of advanced braking, traction and stability control systems. the method proposed is based on a lowcost sensor configuration, suitable for industrial purposes. the validity of the proposed approach is assessed in a multi-body motorbike simulator environment and also on an instrumented test vehicle.

✍ Boniolo, I.; Savaresi, S.M.; Tanelli, M. 📂 Article 📅 2009 🏛 The Institution of Engineering and Technology 🌐 English ⚖ 1001 KB