𝔖 Bobbio Scriptorium

✦ LIBER ✦

Characterization of oxide layers on Ti–2Al–2.5Zr and Ti–4Al–2V alloys oxidized at 300 °C in a neutral water steam

✍ Scribed by Z.G. Wang; X.T. Zu; J. Lian; X.Q. Huang; L. Wang; Y.Z. Liu; L.M. Wang

Book ID: 116597979
Publisher: Elsevier Science
Year: 2004
Tongue: English
Weight: 168 KB
Volume: 384
Category: Article
ISSN: 0925-8388
DOI: 10.1016/j.jallcom.2004.04.084

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Mechanical characteristics, failure regu

Mechanical characteristics, failure regularities, and dimple structures on failure surfaces of Ti–6Al–4V ‘ELI’ ultrafine-grained alloy at temperatures from 300 to 4.2 K

✍ Elena D. Tabachnikova; Aleksey V. Podolskiy; Vladimir Z. Bengus; Sergey N. Smirn 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 379 KB

The effect of Si additions on the high t

The effect of Si additions on the high temperature oxidation of a ternary Ni–10Cr–4Al alloy in 1 atm O2 at 1100 °C

✍ S. Wang; Y. Wu; C.S. Ni; Y. Niu 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 560 KB

Comments to papers of J.H. Kim et al. [1

Comments to papers of J.H. Kim et al. [1] and M. Große et al. [2] recently published in JNM “On the hydrogen uptake of Zircaloy-4 and M5™ alloys subjected to steam oxidation in the 1100–1250 °C temperature range”

✍ J.-C. Brachet; V. Vandenberghe 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 230 KB

CW Laser Operation of KLu0.945Tm0.055(WO

CW Laser Operation of KLu0.945Tm0.055(WO4)2ndash;KLu(WO4)2 Epilayers Near 2 μm Silvestre, O.; Pujol, M.C.; Aguilo, M.; Diaz, F.; Mateos, X.; Petrov, V.; Griebner, U. Quantum Electronics, IEEE Journal of Volume: 43 , Issue: 3 Digital Object Identifier: 10.1109/JQE.2006.890383 Publication Year: 2007 , Page(s): 257 - 260 IEEE Journals & Magazines Quick Abstract | PDF (261 KB) Thin epilayers of monoclinic KLu(WO4)2 doped with thulium are grown by liquid phase epitaxy on undoped KLu(WO4 )2 substrates. The epitaxial composites are optically characterized and implemented in a cavity, longitudinally pumped (normal to the layer) by a Ti:sapphire laser. Tunable (1894-2039 nm) continuous-wave laser operation is achieved with maximum slope efficiency as high as 64% with respect to the absorbed pump power at 802 nm. T

✍ C. Masoller; T. Sorrentino; M. Chevrollier; M. Oria 📂 Article 📅 2007 🏛 IEEE 🌐 English ⚖ 262 KB