✦ LIBER ✦

Characterization of nylon 6/ABS blends with and without a maleated polybutadiene as compatibilizer

✍ Scribed by F.-C. Chiu; Sun-Mou Lai; H.-C. Li; C.-C. Chen

Publisher: Springer
Year: 2010
Tongue: English
Weight: 787 KB
Volume: 18
Category: Article
ISSN: 1022-9760
DOI: 10.1007/s10965-010-9457-6

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Polyamide 6/maleated ethylene–propylene–

Polyamide 6/maleated ethylene–propylene–diene rubber/organoclay composites with or without glycidyl methacrylate as a compatibilizer

✍ Lingyan Zhang; Chaoying Wan; Yong Zhang 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 577 KB

Toughening and compatibilization of poly

Toughening and compatibilization of polypropylene/polyamide-6 blends with a maleated–grafted ethylene-co-vinyl acetate

✍ Hongzhi Liu; Tingxiu Xie; Lianlong Hou; Yuchun Ou; Guisheng Yang 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 447 KB 👁 2 views

Morphology, thermal behavior, and mechan

Morphology, thermal behavior, and mechanical properties of PA6/UHMWPE blends with HDPE-g-MAH as a compatibilizing agent

✍ Zhanhai Yao; Zhihui Yin; Guoen Sun; Chaozhong Liu; Jin Tong; Luquan Ren; Jinghua 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 168 KB 👁 2 views

A functionalized high-density polyethylene (HDPE) with maleic anhydride (MAH) was prepared using a reactive extruding method. This copolymer was used as a compatibilizer of blends of polyamide 6 (PA6) and ultrahigh molecular weight polyethylene (UHMWPE). Morphologies were examined by a scanning elec

Compatibilizing effect of diglycidyl eth

Compatibilizing effect of diglycidyl ether of bisphenol-A in polymer blend system: Nylon 6 combined with poly(butyl acrylate) core and poly(methyl methacrylate) shell particles

✍ Xiaodong Wang; Hangquan Li 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 201 KB 👁 2 views

A polymeric blend system of nylon 6 and a core-shell impact modifier was studied. The modifier had a poly(butyl acrylate) core and a poly(methyl methacrylate) (PMMA) shell compatibilized with an epoxy resin, diglycidyl ether of bisphenol-A (DGEBA). The compatibilization of DGEBA is achieved by the r