✦ LIBER ✦

Characterization of Nicalon fibres with varying diameters: Part I Strength and fracture studies

✍ Scribed by S. T Taylor; Y. T Zhu; W. R Blumenthal; M. G Stout; D. P Butt; T. C Lowe

Book ID: 111533919
Publisher: Springer
Year: 1998
Tongue: English
Weight: 790 KB
Volume: 33
Category: Article
ISSN: 0022-2461
DOI: 10.1023/a:1004343608115

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Characterization of Nicalon fibres with

Characterization of Nicalon fibres with varying diameters: Part II Modified Weibull distribution

✍ Y. T Zhu; S. T Taylor; M. G Stout; D. P Butt; W. R Blumenthal; T. C Lowe 📂 Article 📅 1998 🏛 Springer 🌐 English ⚖ 230 KB

Fracture strength testing of δ-alumina f

Fracture strength testing of δ-alumina fibres with variable diameters and lengths

✍ A.S. Kim; S. Bengtsson; R. Warren 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 587 KB

Fracture strength of four-unit Y-TZP FPD

Fracture strength of four-unit Y-TZP FPD cores designed with varying connector diameter. An in-vitro study

✍ C. LARSSON; L. HOLM; N. LÖVGREN; Y. KOKUBO; P. VULT VON STEYERN 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 611 KB

Measurement of the in situ ply fracture

Measurement of the in situ ply fracture toughness associated with mode I fibre tensile failure in FRP. Part II: Size and lay-up effects

✍ M.J. Laffan; S.T. Pinho; P. Robinson; L. Iannucci 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 966 KB

TOF SIMS and XPS study of the interactio

TOF SIMS and XPS study of the interaction of aminosilanised E-glass fibres with epoxy resins. Part I: Diglycidyl ether of bisphenol S

✍ D. Wang; F.R. Jones 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 818 KB

Perforation of 12 mm thick steel pl

Perforation of 12 mm thick steel plates by 20 mm diameter projectiles with flat, hemispherical and conical noses: Part I: Experimental study

✍ T Børvik; M Langseth; O.S Hopperstad; K.A Malo 📂 Article 📅 2002 🏛 Elsevier Science 🌐 English ⚖ 485 KB

Projectiles with three different nose shapes (blunt, hemispherical and conical) have been used in gas gun experiments to penetrate 12 mm thick Weldox 460 E steel plates. Based on the experimental results, the residual velocity curves of the target material were constructed and compared. It was found