✦ LIBER ✦

Characterization of edgeless detectors fabricated by dry etching process

✍ Scribed by G. Pellegrini; F Campabadal; M Lozano; S. Martí; M. Miñano; J.M. Rafí; M. Ullán

Publisher: Elsevier Science
Year: 2007
Tongue: English
Weight: 293 KB
Volume: 576
Category: Article
ISSN: 0168-9002
DOI: 10.1016/j.nima.2007.01.128

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Edgeless detectors fabricated by dry etc

Edgeless detectors fabricated by dry etching process

✍ G. Pellegrini; M. Lozano; F. Campabadal; C. Fleta; J.M. Rafí; M. Ullán 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 251 KB

Process optimization and characterizatio

Process optimization and characterization of silicon microneedles fabricated by wet etch technology

✍ N. Wilke; A. Mulcahy; S.-R. Ye; A. Morrissey 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 372 KB

Integrated microfluidic–microoptical sys

Integrated microfluidic–microoptical systems fabricated by dry etching of soda-lime glass

✍ Julien Vieillard; Radoslaw Mazurczyk; Lynda-Lawrence Boum; Aude Bouchard; Yann C 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 436 KB

Fabrication of a silicon micromachined c

Fabrication of a silicon micromachined capacitive microphone using a dry-etch process

✍ Y.B Ning; A.W Mitchell; R.N Tait 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 581 KB

Characterization of silicon during the f

Characterization of silicon during the fabrication of nuclear detectors by the planar process

✍ J.Ch. Fontaine; S. Barthe; J.P. Ponpon; J.P. Schunck; P. Siffert 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 432 KB

Characteristics of YBCO step-edge juncti

Characteristics of YBCO step-edge junctions fabricated by a chemical etching process

✍ C.H. Park; J.P. Hong; I.H. Song; E.-H. Lee; C.W. Moon; S.A. Song; J.-W. Lee 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 730 KB

High-T= step-edge junctions have successfully been fabricated on chemically etched MgO substrate steps. Epitaxial thin films of YBa2Cu,0,\_6 have been prepared utilizing an off-axis RF magnetron sputtering method. AFM observations were made to investigate surface morphology of the etched substrate a