The electrochemical behavior of the interface between lithium (Li) alloy electrodes containing a small amount of metal [aluminum (Al) or tin (Sn)] and a propylene carbonate (PC)-based electrolyte has been investigated. The contents of Al and Sn were below 3.0 wt.%. AC impedance analysis revealed tha
Characteristics of the lithium electrode in organic and polymeric electrolytes
โ Scribed by S. Morzilli; F. Bonino; B. Scrosati
- Publisher
- Elsevier Science
- Year
- 1987
- Tongue
- English
- Weight
- 361 KB
- Volume
- 32
- Category
- Article
- ISSN
- 0013-4686
No coin nor oath required. For personal study only.
โฆ Synopsis
The characteristics of the lithiutn electrode were examined in an organic and a polymeric electrolyte of interest for the development of rechargeable batteries. Results obtained by frequency response analysis and by polarization curves. were used to identify charge-transfer resistance, double layer capacity and properties df passivation films:
๐ SIMILAR VOLUMES
Effects of organic additives on the (IC impedance behaviour of rechargeable lithium electrode in propylene carbonate dissolving LiClO, (PC/LiClO,) have been studied. Addition of 2-methylfuran, Zmethylthiophene or benzene to the electrolyte solution improved the coulombic efficiencies of lithium duri
The transport and electrochemical properties of gel-type ionic conducting membranes formed by immobilizing liquid solutions of lithium salts in a poly(methylmethacrylate) matrix have been determined. In particular, the conductivity, the lithium ion transference number and the electrochemical stabili
Blend-based polymer electrolytes composed of poly(ethy1ene oxide), poly(oligo[oxyethylene]oxysebacoyl), and lithium salts have been prepared. These polymer electrolytes have been investigated in terms of ionic conductivity, transport number, and interfacial characteristics of the lithium electrode i