✦ LIBER ✦

Challenges of circulating fluid-bed reactors in energy and raw materials industries

Book ID: 108398016
Publisher: Elsevier Science
Year: 2001
Weight: 179 KB
Volume: 42
Category: Article
ISSN: 0140-6701
DOI: 10.1016/s0140-6701(01)80567-1

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Biomass pyrolysis in a circulating fluid

Biomass pyrolysis in a circulating fluid bed reactor for the production of fuels and chemicals

✍ A.A Lappas; M.C Samolada; D.K Iatridis; S.S Voutetakis; I.A Vasalos 📂 Article 📅 2002 🏛 Elsevier Science 🌐 English ⚖ 241 KB

Selection and Application of Gas Fluid B

Selection and Application of Gas Fluid Bed Reactors in the Non-Ferrous Metals Industry

✍ RUDOLPH, V. 📂 Article 📅 1992 🏛 Taylor and Francis Group 🌐 English ⚖ 462 KB

97/03004 Experimental results of thermal

97/03004 Experimental results of thermal utilization of wastes and renewable raw materials in circulating fluidized-bed firings

📂 Article 📅 1997 🏛 Elsevier Science ⚖ 204 KB

Parameter analysis and scale-up consider

Parameter analysis and scale-up considerations for thermal treatment of industrial waste in an internally circulating fluidized bed reactor

✍ Lukanda Mukadi; Christophe Guy; Robert Legros 📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 231 KB

Potential recovery of industrial wood an

Potential recovery of industrial wood and energy wood raw material in different cutting and climate scenarios for Finland

✍ Leena Kärkkäinen; Juho Matala; Kari Härkönen; Seppo Kellomäki; Tuula Nuutinen 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 529 KB

Biomass pyrolysis in a circulating fluid

Biomass pyrolysis in a circulating fluid bed reactor for the production of fuels and chemicals : Lappas, A. A. et al. Fuel, 2002, 81, (16), 2087–2095

📂 Article 📅 2003 🏛 Elsevier Science ⚖ 261 KB

## Combustion (burners, combustion systems) operates at a medium pressure (4.0 MPa), two-phase flow instabilities are a difficult problem. The design must eliminate two-phase flow instabilities and the system must be tested to show that flow instability does not occur.