✦ LIBER ✦

CFD simulation of smooth and T-abrupt exits in circulating fluidized bed risers

✍ Scribed by Xuezhi Wu; Fan Jiang; Xiang Xu; Yunhan Xiao

Publisher: Elsevier
Year: 2010
Tongue: English
Weight: 553 KB
Volume: 8
Category: Article
ISSN: 1674-2001
DOI: 10.1016/j.partic.2010.01.007

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Influence of exit geometry in circulatin

Influence of exit geometry in circulating fluidized-bed risers

✍ A. T. Harris; J. F. Davidson; R. B. Thorpe 📂 Article 📅 2003 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 392 KB 👁 2 views

Effect of riser exit geometry on bed hyd

Effect of riser exit geometry on bed hydrodynamics and heat transfer in a circulating fluidized bed riser column

✍ B. V. Reddy; P. K. Nag 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 130 KB 👁 2 views

CFD Modelling and Simulation of Hydrodyn

CFD Modelling and Simulation of Hydrodynamics in Liquid-Solid Circulating Fluidized Beds

✍ Yi Cheng; Jing-Xu (Jesse) Zhu 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 392 KB 👁 2 views

Similar profiles of solid flux in circul

✍ M.J. Rhodes; X.S. Wang; H. Cheng; T. Hirama; B.M. Gibbs 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 773 KB

Results of detailed experimental measurements of solids mass flux profiles in circulating tfuidized-bed risers of internal diameter 0.152 and 0.305 m are described. The ranges of superficial gas velocity and mean solids mass flux used were 3-5 m s-1 and 2-111 kg m ' s I, respectively, and the solids

Cluster identification and characterizat

Cluster identification and characterization in the riser of a circulating fluidized bed from numerical simulation results

✍ Luben Cabezas-Gómez; Renato César da Silva; Hélio Aparecido Navarro; Fernando Ed 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 798 KB

Modelling and simulation of a gas–solids

Modelling and simulation of a gas–solids dispersion flow in a high-flux circulating fluidized bed (HFCFB) riser

✍ J.C.S.C. Bastos; L.M. Rosa; M. Mori; F. Marini; W.P. Martignoni 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 399 KB

Radial solids velocity profiles were computed on seven axial levels in the riser of a high-flux circulating fluidized bed (HFCFB) using a twophase 3-D computational fluid dynamics model. The computed solids velocities were compared with experimental data on a riser with an internal diameter of 76 mm