✦ LIBER ✦

Cavity nucleation and growth in a 1%Cr−0.5%Mo steel

✍ Scribed by M.R. Myers; R. Pilkington; N.G. Needham

Publisher: Elsevier Science
Year: 1987
Weight: 892 KB
Volume: 95
Category: Article
ISSN: 0025-5416
DOI: 10.1016/0025-5416(87)90500-3

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Creep crack propagation in a bainitic 1C

Creep crack propagation in a bainitic 1Cr0.5Mo steel between 540 and 590°C

✍ J.L Henshall; M.G Gee 📂 Article 📅 1986 🏛 Elsevier Science ⚖ 730 KB

Hydrogen embrittlement of a 1 wt % cr/0.

Hydrogen embrittlement of a 1 wt % cr/0.5 wt % mo pressure vessel steel in high pressure water

✍ D.R. Harries 📂 Article 📅 1964 🏛 Elsevier Science 🌐 English ⚖ 500 KB

Environmental crack growth in 0.5CrMoV

Environmental crack growth in 0.5CrMoV steel during isothermal high strain fatigue and temperature cycling

✍ R.P. Skelton 📂 Article 📅 1978 🏛 Elsevier Science ⚖ 783 KB

Identification of carbonitride precipita

Identification of carbonitride precipitates in a 1wt.%Cr0.5wt.%Mo steel using analytical electron microscopy

✍ Y.J. Lee; P.R. Miller; B.C. Muddle 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 1000 KB

Fatigue crack growth mechanism in aged 9

Fatigue crack growth mechanism in aged 9Cr–1Mo steel: threshold and Paris regimes

✍ Vibhor Chaswal; G. Sasikala; S.K. Ray; S.L. Mannan; Baldev Raj 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 698 KB

Room temperature fatigue crack growth (FCG) testing was conducted after thermal aging for 500 and 5000 h at 823 K and for 500 h at 923 K, on 9%Cr-1%Mo steel normalized at 1323 K and tempered at 1053 K. Though crack growth behavior in Paris regime is not much affected by aging, stress intensity facto

Causes of breakdown of creep strength in

Causes of breakdown of creep strength in 9Cr–1.8W–0.5Mo–VNb steel

✍ Jae Seung Lee; Hassan Ghassemi Armaki; Kouichi Maruyama; Taro Muraki; Hitoshi As 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 461 KB